Re: HPDM 4.7 SP4 - Thin Clients WES7E not recognized after HPDM Update
http://h30434.www3.hp.com/t5/Business-PCs-Workstations-and-Point-of-Sale-Systems/Devicemanager-4-7-SP3-and-SP4-break-thinclient-HPDM-agents/m-p/5762050#M13944 A similar topic in a different post - see...
View ArticleHP ThinPro license question
Hello every one! I have a question about ThinPro OS. Can I install"ThinPro"on thethin clientfrom another manufacturer, not HP?Does the license of "ThinPro"make this possible? I have three...
View ArticleRe: Devicemanager 4.7 SP3 and SP4 break thinclient HPDM agents
HPDM 4.7 Service Pack 5 just got released which includes additional checks while the Agent upgrade.Can you try to upgrade to SP-5 and then do the Agent Update on one of the units that still has a...
View ArticleRe: Z240 POST Message disable?
One of the HP engineers who has been very helpful to us here has recently posted on a related question, and he has access to the schematics and the internal design details of these workstations. His...
View Articlexw8600 Memory and CPUs temperature / memory fan and Northbridge chip fan RPMs
xw8600 with 2x Xeon E5405@2GHz(80W)/ Hewlett-Packard 0A98h/PC5300F DDR2 FB-DIMM Micron 4GB sticks/ BIOS 786F5 v01.46 Hello,Question to xw8600 users and someone who knows what real temperatures and RPMs...
View ArticleRe: Windows 7 does not recognize any hard drives, but the DPS self test runs
Thanks for the reply The 1TB did not have a boot/system partittion on it, it was a new drive. I used the repair disk to get a cmd prompt and no drives were available to it. The HDD works fine from an...
View ArticleRe: Z420 RAM upgrade compatibility and performance concerns
Anu0512 wrote:jleonard711 Your RAM are working fine ? can post some details like brand. I have one question right now I have 16 GB in four solt and other four solt are empty so if i put other brand...
View ArticleRe: Devicemanager 4.7 SP3 and SP4 break thinclient HPDM agents
Hi, looks like the issue is indeed solved with SP5. I've update 7 clients so far without issues. Frank.
View Articlez840 external SAS raid
I am upgrading my z800 to a z840. I use the builtin external SAS port to connect to an Avid VideoRAID SR external RAID. This is a hardware raid, that presents itself as a single disk to the system. It...
View ArticleRe: z840 external SAS raid
update - i think ive solved it.I had a blackmagic SDI video output card in slot 6 (according the conifguration guide from the software vendor for the system i use). In my old Z800 that card was in slot...
View ArticleRe: z840 external SAS raid
ugh, nevermind. a reboot and its now back to slow again. Im totally stumped here, it seems to randomly get fast after awhile and be totally fine until i reboot. is there something in windows 10 that...
View Articleusb ports not providing enough power
We have a usb scanner that requires 500mA of power. However, for several of our customers using HPs, the usb ports are not providing enough power to the scanner causing an application crash. Some...
View ArticleRe: usb ports not providing enough power
RH_ Hello;Allow me to welcome you to the HP forums!If your question is about increasing the power going to the USB ports on the motherboard, or on the case but powered through a cable attached to the...
View ArticleRe: Windows 7 does not recognize any hard drives, but the DPS self test runs
I sometimes see the problem that Windows does not assign a drive letter to a newly connected drive (even if it has been assigned one before), and does not bring up the prompt to do so automatically....
View ArticleRe: Windows 8 t520 Thin client failures / consistent crashes
Hey Eric, did you ever find a solution to the BSOD problem? Trying to pick this up again over here.
View ArticleUsing hptc-bios-flash on TC T620
I am trying to update the BIOS on a Thin Client T620 (HP ThinPro 6-64) from 2.08 to 2.11 and I am having issues with hptc-bios-flash. I get the following message. "The version of BIOS on thie thin...
View ArticleHP Thinpro t620 Imaging Question
I have our HPDM setup to push an image to our thin clients on first contact and it works great, even when I factory reset the client from the HPDM. However, if I factory reset one of the t620's from...
View ArticleRe: usb ports not providing enough power
I am not familiar witht eh exact models but 500MA is the max output for USB 2.0 but 3.0 can go higher have you tried usingn 3.0 ports if not you can also get a Y cable tha uses the power from 2 ports....
View ArticleRe: z820 LSI RAID controller not working
Gues what no motherboards they sell you a warranty but don't stock parts! We want to inform you that the part required to perform the repair on your unit, is currently unavailable. Once the part is...
View Article