Clik here to view.
Re: HP Z840 bios v2.21 - need help verifying virtualization option in bios
Z440Roger wrote:I don´t know if it will help you, but the latest BIOS is v2.23. Thanks - I do have 2.23 installed and I made the correction to the OP.
View ArticleClik here to view.
Re: z400 upgrade help
BambiBoomZ wrote: CPU: The Xeon X5677 should give good results over a wide range of uses. We have three systems in the office using Core2 CPU's with single-thread rating under 1300 and with a good...
View ArticleRe: Driver issues with HP Z440 and SCCM 2012 R2?
I Would recommend injecting the RAID drivers into the boot image and then try running the buiilds again. Injecting the RAID drivers, Network, Chipset should allow the boot up to see the drive.
View ArticleRe: Z420 RAM upgrade compatibility and performance concerns
wtrmn, I have read some posts where peope have successfully booted with non-ECC memory, but the instances are rare and unverified. So it may work, but maybe only with certain memory brands/models. I...
View Articlehp smart array p440ar/2gb fbwc windows 2003
Hello!Will it (hp smart array p440ar/2gb fbwc) work on windows 2003 (32bit) ?
View ArticleRe: HPDM 4.7 SP4 - Thin Clients WES7E not recognized after HPDM Update
Has any progress been made on this at all? I have updated a few TC's in the field but its incredibly hit and miss ... i can no longer shadow the thin clients to try and get in to fix?
View ArticleRe: hp smart array p440ar/2gb fbwc windows 2003
Hi: You may also want to post your question on the HP EBC Support Forum -- Proliant Servers section https://community.hpe.com/t5/ProLiant-Servers-ML-DL-SL/bd-p/itrc-264#.V9fxKeT6u9I
View ArticleEliteDesk 705 G1 desktop mini support NVMe drives?
Can someone confirm or deny that the EliteDesk 705 G1 desktop mini supports NVMe M.2 drives? I've seen mention that the 800 G1 systems support NVMe drives, but not the 705 series. The quickspecs for...
View Article800G2 all in one, wakes on lan to PXE but not hard drive
I have an issue with 18 800G2 all in ones. I can easily boot any of them using wake on lan but, they all want to boot to PXE. Nothing I have tried changing in the BIOS has made a difference. I need...
View ArticleRe: 800G2 all in one, wakes on lan to PXE but not hard drive
Go to the BOOT options in the BIOS. Uncheck the Network (PXE) Boot option. Then go to Built-in Device Options. Set Wake On LAN to Boot to Hard Driver. REO
View ArticleRe: 800G2 all in one, wakes on lan to PXE but not hard drive
I have no idea how I missed that. Looked right at it and it just did not register. UGH!!!!!!!!!!!!Thanks REO,Dan
View ArticleRe: 800G2 all in one, wakes on lan to PXE but not hard drive
No problem that's what we are here for. REO
View ArticleRe: Z420 RAM upgrade compatibility and performance concerns
jleonard711 Your RAM are working fine ? can post some details like brand. I have one question right now I have 16 GB in four solt and other four solt are empty so if i put other brand RAM same like...
View ArticleRe: EliteDesk 705 G1 desktop mini support NVMe drives?
If this is your model I can not find anything about NVMe M.2 support. HP EliteOne 705 G1 23-inch Non-Touch All-in-One PC - System board - Gladiator - BIOS Simulator...
View ArticleClik here to view.
Re: Z420 RAM upgrade compatibility and performance concerns
Hi Leonard, I ended up returning the non-ECC ram, and bought 32 gigs kingston ECC ram on Amazon for about $170 Alot more expensive than the ebay ram. I had it installed in minutes, and it's been...
View ArticleZ240 POST Message disable?
Hello, My company recently purchased some Z240 SFF workstations and put in aftermarket multi-media card readers in the 3.5" slot. The card reader uses the internal USB 3.0 header, so I had to unplug...
View ArticleRe: Devicemanager 4.7 SP3 and SP4 break thinclient HPDM agents
Hi Chen, I had to use the Sysinternal Process Explorer to view which process holds the file LIBEAY32.DLL in use, it wasn't shown in the resource managers' diskactivity. I finally found the culprit! It...
View ArticleRe: Devicemanager 4.7 SP3 and SP4 break thinclient HPDM agents
Thanks for the clarification Frank. I will forward those information to R & D for more investigation.
View Article