Clik here to view.
Re: Adding SSD to Z1 Workstation
I seem to have struck a major roadblock in getting the SSD to work when connected externally via a USB socket. [Previously I had backed up data only using DVD's and occasionally even to USB...
View ArticleRe: Adding SSD to Z1 Workstation
Agree with the Captain.... it is always best to do a clean install from scratch, but more time. I have been able to use Acronis to convert from a good HDD build to a SSD build multiple times, but my...
View ArticleClik here to view.
Re: HP Pro 3500 GPU upgrade questions
I have a HD 6870 with bigger cooler and it works fine http://s9.postimg.org/nbx6u3g67/image.jpg
View ArticleMax RAM possible for a Z600 ver B3
Hi everyone, Quick question about the Z600 ver B3 worksatation. I got a Z600 with DUAL QuadCore X5550, it comes with 4GB RAM, so I'm planing for a RAM upgrade. I understand the Z600 B3 will have to use...
View ArticleRe: Max RAM possible for a Z600 ver B3
Hi, From the following document, you can put 3 x 8GB x 2 = 48GB for a dual CPU machine: http://h20331.www2.hp.com/Hpsub/downloads/HP-Z600-Workstation-memory-configuration-and-optimization.pdf Regards.
View ArticleRe: Max RAM possible for a Z600 ver B3
banhien wrote:Hi, From the following document, you can put 3 x 8GB x 2 = 48GB for a dual CPU machine:...
View ArticleRe: Adding SSD to Z1 Workstation
Thanks, Scott The Z1 has only a single bay for disk drives and that bay will take either 1 x 3.5" or 2 x 2.5" drives. I cannot mount the SSD internally while the HDD is in place. Hence my efforts...
View ArticleSynaptics touchpad driver is forced upon Windows 10 desktop by Windows Update
I use HP EliteDesk 800 G2 SFF pc's with Windows 10 Pro and wonder why the Synaptics touchpad driver gets installed by Windows Update, even though this is a HP desktop with only ordinary keyboard and...
View ArticleRe: Synaptics touchpad driver is forced upon Windows 10 desktop by Windows...
Hi, That is strange and it does sound like this is a Microsoft issue, although I can't give you an explanation for why this occurring. However, you can use the utility on the following link to prevent...
View ArticleRe: Synaptics touchpad driver is forced upon Windows 10 desktop by Windows...
Hello DavidPK. Thank you for your suggestion. Unfortunately this was no solution as the Synaptics driver seems to have some odd proporties in relation to Windows Update. It isn´t visible in the...
View ArticleClik here to view.
XW6400 with no processor, memory, video card
Hi all. I have an XW6400, condition somewhat unknown, that I have decided to get operational. I received this unit for free. It had no processors, memory, or video card. I purchased two 5345...
View ArticleRe: Adding SSD to Z1 Workstation
Your SATA to USB bridge is keeping the SSD from being seen as a SATA bus device. I'd try the spare workstation approach I posted about before.... it will be easy if you have a spare but you might not....
View ArticleRe: HP Compaq 8200 Elite USB ports don't recognize devices on Windows 10
no help.. If I plug in a 3.0 sanDisk to any of the HP 2.0 USB ports I have to go to Device manager and update the driver as a Generic Ram Drive.. If I plugin my Android phone, it's not recognized...
View ArticleRe: XW6400 with no processor, memory, video card
Google for xw6400 technical and service manual..... that will have info on almost everything you'll need. Search this forum for update BIOS from within BIOS. You get the .bin file from the unpacked...
View ArticleRe: Adding SSD to Z1 Workstation
Ohhhh, just had a thought looking at your mess of wires picture. You mention one can run 2 2.5" form factor drives. That means that there are two SATA ports available to you. One will be SATA port 0...
View ArticleRe: Z400 with Non-ECC memory?
I have Z800 with 48 GB of non ECC ram and the system does not show any WHEA errors under Windows Server 2012 R2. I am running 3D and VFX and Editing software without problems. The Advisor shows this...
View ArticleRe: HP Compaq 8200 Elite USB ports don't recognize devices on Windows 10
windows 7 drivers will most likely not work, but windows 8 or newer might. Sorry i can't be of more help. You may also try installing a usb pci-e card - they should be inexpensive
View ArticleRe: Z600 - POST beep error (Five (5) beeps)
@Dan_WGBU, thanks for your reply and sorry for my late response. I have not tried using only 1 CPU, but I'll remove the second CPU and give that a try. I did press CMOS reset button and removed the...
View Article