Re: HP Thin Client t510 - error message there is insufficient disk space in...
The "temp" folder is redirected to the Ramdrive, which is 128mb in your case.You should change the location of the temp folder to something like c:\temp temporarily
View ArticleZ410 & Z420 with K620 adapters – DisplayPort question
We have a Z410 and a Z420. Each uses a Quadro K620 (HP part U1G29PE) and a Dell U2713H display.The displays are connected using DVI cables, and that has worked fine. Both the K620 & the Dell are...
View ArticleHp elite 8000 upgrade power supply
I've got a HP elite 8000 240w power supply....what upgrade can I give the power supply?!The power supply is shaped weird....I'm not a computer wiz either
View ArticleHigh temp when using Boinc computer sharing software
I have a z600 with 2 x5550 cpu and 24 GB ram. When I try to run it above 60% load it reaches 91c with Core Temp software.The computer is clean and free of dust. Is this normal?
View ArticlePROBLEM WITH BIOS UPDATE AND CPU UDPATE
Hello hp Experts, I have bios 6.07 02/07/2010 an I downloaded newer from your site, Rev. 6.7 A (10 Mar 2011), the installation went smoothly, but the new BIOS is not there. Plus everywhere it says that...
View Articlehp mini 400 g2, DP issue
HiI have a problem with 4k display and HP ProDesk 400 G2 mini (i3-6100t). The maximal resolution 3840x2160 at 60Hz is causing the flickering. The flickering is seen in the linux system and also in the...
View ArticleRAID10 - bad block table full
Hi All, We have a Z840 workstation with an LSI2308 controller using 6 identical HDDs set up as RAID10. After I noticed several errors in the system log concerning the RAID - we are running Arch Linux -...
View ArticleSlow boot process
Hi, Our company just purchased a few 8300 Elite slim desktops from a vendor. They all perform well with a fresh install of Windows 10. The only thing that has me scratching my head is the reboot...
View ArticleRe: Adding SSD to Z1 Workstation
Patience rewarded! Mr 2.5/3.5 bracket finally arrived and all systems are go for installation of the SSD drive this weekend. The tracker says that the bracket arrived in Australia on Thursday,...
View ArticleHP Touchsmart Elite 7320 Win 10 Touchscreen, Tablet PC Input Panel invisable...
Hi, Is there a driver for the HP Touchsmart Elite 7320 for Windows 10? If i upgrade to windows 10 then can i not use Tablet PC Input Panel in de left corner Greetings Frank
View ArticleRAID10 - bad block table full
Hi All, We have a Z840 workstation with an LSI2308 controller using 6 identical HDDs set up as RAID10. After I noticed several errors in the system log concerning the RAID - we are running Arch Linux -...
View ArticleZ230, windows 10, and compatible graphics cards to power 4 displays
I recently got a Z230 running bios version 1.52. In the bios, Legacy mode is enabled and secure boot is disabled.The onboard video will power 3 monitors. I have 4 monitors so I'd like to power all of...
View ArticleMicrosoft WDS issue, Lan-driver not available for HP 400G3PD SFF
We're using WDS in our organisation for distributing the Windows7 OS (32b en 64b) to our desktops.Recently we've recieved a new type desktop-pc HP 400G3PD SFF i56500 and I wan't to install these...
View ArticleUnable to WinPE boot 800 g2 Mini: DHCP error
Im trying to image our new 800 g2 mini business pc with wds.When the client tries to start boot.wim I get a dhcp error. I downloaded all the drivers I could get end inserted them into my boot.wim but...
View ArticleRe: Adding SSD to Z1 Workstation
That is good news! I think we have it easy here in the U.S. with eBay and so many used parts available. I'm sure your project will help many others via the forum. The pics were great, and more will...
View ArticleClik here to view.
Re: Adding SSD to Z1 Workstation
Hey, glad to hear you are making progress! Post back with photos once you have everything up and running! Regarding the issues with cloning, the link that you've provided does offer some helpful...
View ArticleRe: High temp when using Boinc computer sharing software
Coretemp also shows a value for Tj max. What is it for your processors? Coretemp can be set to show the difference between Tj max and the core temps. This temperature varies depending on the...
View ArticleRe: Z600 - POST beep error (Five (5) beeps)
5 beeps is usually a memory error. You followed the recommended steps to determine if a bad DIMM is causing this problem. Step 5 says you replaced the system board with another. Did you try to run...
View ArticleClik here to view.
Re: Adding SSD to Z1 Workstation
Captain_WD wrote:Hey, glad to hear you are making progress! Post back with photos once you have everything up and running! Regarding the issues with cloning, the link that you've provided does offer...
View ArticleRe: Adding SSD to Z1 Workstation
SDH wrote:That is good news! I think we have it easy here in the U.S. with eBay and so many used parts available. I'm sure your project will help many others via the forum. The pics were great, and...
View Article