Re: PCI-e cards not detected in ProDesk 600 G1
I ended up upgrading the Bios to the latest and that seemed to have fixed the issue.
View ArticleRe: New Nvidia GTX 1080 card on HP ENVY Phoenix 860
Max load is probably 470w and that is what you are seeing most likely. I have a Phoenix myself and it came with a 500w power supply. It also says 500w on it. Gotta check the label again and pretty sure...
View ArticleRe: HP Connection Manager Link Broken
Thank you for visiting the HP Support Forums and Welcome.Below information may help youhttp://h10032.www1.hp.com/ctg/Manual/c02841744.pdf Regards;DebashishI am an HP employeePlease click the White...
View ArticleRe: PCI-e cards not detected in ProDesk 600 G1
Thanks for the tip, but even after updating the BIOS the computer still is not recognizing the card in any of the pci-e slots.
View ArticleRe: Z800 Bios update - please help
Thanks SDH ... sounds like I have some work to do this weekend installing a fresh version of Windows 10. I am going to update the BIOS and see if that has any effect, and will report any success or...
View ArticleRe: Z800 Bios update - please help
For the Z800 I'd personally deactivate the LSI SAS "device" in BIOS, under the Security tab, Device Security, before the clean install. I'm guessing you'll never be using SAS and there have been some...
View ArticleRe: New Nvidia GTX 1080 card on HP ENVY Phoenix 860
From the Nvidia gtx 1080 specs the actual power draw is 180W and the recommended power supply that we need to have based on Nvidia 1080 recommendation is 500W. Now the HP pheonix specs say it is 500W....
View ArticleRe: New Nvidia GTX 1080 card on HP ENVY Phoenix 860
To help others who are thinking of doing the same here is some more of my experience with installing this card. So I needed to trouble shoot things a bit becuase I never did this before and was just...
View ArticleRe: New Nvidia GTX 1080 card on HP ENVY Phoenix 860
nvakleko wrote:From the Nvidia gtx 1080 specs the actual power draw is 180W and the recommended power supply that we need to have based on Nvidia 1080 recommendation is 500W. Now the HP pheonix specs...
View ArticleRe: Audio Dropouts Behringer X32
On another forum someone suggested I move the X32 from a USB3 port, which is where it was plugged in, to a USB2 port, as its a USB2 device. I know it shouldn't make a difference but it did and now I...
View ArticleUPGRADE HDD
Hello...I want upgrade my hdd from wd800(80gb) to wd 2500(250gb)for my hp dc5800... is it will compatible with my hp dc5800 ??? THX
View ArticleRe: UPGRADE HDD
Hi: That should be fine. You can go to 1 TB if you want with no problem. Just make sure you can get a SATA II hard drive. A SATA III hard drive may note work because of this document....
View ArticleRe: Installing a HP Z Turbo Drive G2 on a HP Z840
Thank you. No luck at all. Although I managed to get Windows to recognise the Z drive after installing a driver/software from the HP support page for the Z840, for Windows 7 Pro 64bit. However when I...
View ArticleClonezilla server and z230 issue
Hello.I wish to clone several hp z230 using clonezilla server(drbl) last version. All go fine when i press f12 to boot pxe and clonezilla server start to send boot and ip address, but when it tries...
View ArticleRe: Z800 Bios update - please help
One word ... Acronis. I was hesitant to do a fresh install, and re-install eveything I had before. I did some digging and found a windows 10 forum where there were 100's of complaints similar to mine....
View Articlei have a hp t510 thin client energy star, looking to factory reset,
i believe it is Windows Embedded XP.. Im not too sure. Have tried previous answers, but non seem to be working. Please help
View ArticleFeature byte error
HI,Is it required to be update feature byte on MB?What will happen if we Don't?
View ArticleLost recovery CD
Hi I lost my recovery CD for HP Compaq 8200 Elite Convertible Minitower.Can I download anywhere the ISO or send me a backup CD?Thanks
View ArticleRe: Want to upgrade to NVIDIA GTX1080 from Quadro K600 in z220 workstation
Hi!The PSU is non-standard. I have the same model (only different CPU) and want to upgrade too. I guess I'll try the new AMD RX 480. It is in the proper power range (<150W) and should be okay for...
View ArticleRe: HP Connection Manager Link Broken
These instructions are how to set up the thin clients. Those are already set up and deployed at various locations. This was of no help.
View Article