Re: HP Compaq 8000 Elite Small Form Factor PC booting problem after bios update
In that case the issue could be with the OS installed on the unit. Run a diagnostics on the HDD to make sure that the HDD is fine. Then you may need to re-image the HDD on the computer.
View ArticleRe: HP Compaq 8000 Elite Small Form Factor PC booting problem after bios update
I reinstalled the OS multiple times. It's something with the bios as the previous poster mentioned. After forcibly shutting down the computer and starting again it loads Windows fine. How do I...
View ArticleRe: HP Compaq 8000 Elite Small Form Factor PC booting problem after bios update
Usually in these units, there is no way to downgrade a BIOS. The latest version in the website is v1.14 released in 27 Nov 2015. The earliest one in the website is v1.09(1 Apr 2011).
View ArticleRe: HP Prodesk 600 G2
the new Intel Skylake processors have architectural changes to the way USB is supported and the new implementation is not supported in Windows 7 NOTE: ISO creation software and DVD burning capability...
View ArticleRe: wont start blank black screen
From what you are saying, it could be a display issue. Check if you atleast see the HP logo when the unit powers on. Also when the unit powers on keep tapping the F10 key or the ESC key to see if you...
View ArticleRe: HP Prodesk 600 G2
I had a feeling it was the USB 3 drivers. Just wanted to make sure that is was not a BIOS issues. Thanks Roby!
View ArticleClik here to view.
Re: HP Prodesk 600 G2
Thanks for the help guys,that explains alot,just to add it looks like some series are with bad hdds WD blue, i have few of those, it mite be the problem with not reading hdd after boot. Straight out of...
View ArticleRe: Elite 8300 won't boot with USB drive connected
These units might have issues booting up if a USB device of capacity 3TB or more is connected to it. There is a BIOS update needed to fix it. Check the Drivers page to see if you have the latest BIOS...
View ArticleHP Easy Tools for Windows Embedded Standard 7P
I am unable to locate download links for the HP Easy Tools package for a t620 Flexible Thin Client running Windows Embedded Standard 7P. I need to gain access to the HP Easy Capture tool to capture a...
View ArticleZ410 & Z420 with K620 adapters – DisplayPort question
We have a Z410 and a Z420. Each uses a Quadro K620 (HP part U1G29PE) and a Dell U2713H display.The displays are connected using DVI cables, and that has worked fine. Both the K620 & the Dell are...
View ArticleRe: HP Prodesk 600 G2
Well I though I had a utility but after the reboot I lost the drivers again.
View ArticleRe: Upgrading Z1 Workstation (Mk 1), CPU / GPU options in 2016?
Sorry for the off-topic to the OP.KUEI12 I've sent you a private message.
View Articlehp mini 400 g2, DP issue
HiI have a problem with 4k display and HP ProDesk 400 G2 mini (i3-6100t). The maximal resolution 3840x2160 at 60Hz is causing the flickering. The flickering is seen in the linux system and also in the...
View ArticleRe: Cant find the network driver that MDT needs for Prodesk 600G2
Hey Jesse025 I too had the same problem with ProDesk 600 G2 and EliteDesk 800 G2. Fixed it by using the HP WINPE 5.0 driver pack found here:...
View ArticleRe: 4GB DDR3 RAM but what type ECC or non ECC shipped wih the G1X51ET ?
Well, according to HP SUPPORT COMMUNICATION - PRODUCT CHANGE NOTIFICATION Doc. ID: c04816931, titled: HP Z Workstation series October 2015 Software Refresh (Windows 7/10) - PSG URL:...
View ArticleRe: HP Z200 boot error with Crucial SSD
I'm receiving this same error on an HP Z200 Workstation with two brand new Crucial SSDs. 1720-SMART Hard Drive detects imminent failure Failing Drive: SATA0 (dark blue) Failing Attribute: #180...
View ArticleRe: Re-imaging HP T620 PLUS Flexible Thin Clients
Hello, I followed the instructions that you listed above, however I am not able to get my Thin Client to boot off the USB key. Everytime I boot the machine with the USB drive, the following message...
View ArticleRe: PRODESK 600 G1 SFF USB 3.0 ports stopped recognising USB 3.0 devices
I have similar problem (PC does not recognize usb 3.0 devices) but I can not download driver (Download details not available at this site - message).Worst case - put usb 3.0 device (flash drive) and it...
View ArticleZ600 - POST beep error (Five (5) beeps)
I bought a used Z600 Workstation with 12 GB of ram and dual Xeon E5520 cpus about a year ago. It's been running VMware esxi 6 like a champ, 24/7, without issue. I made a change to esxi to enable hyper...
View Article