Re: SSD on Z440, Z420
New SSD is visible in bios and currently work as system disk (windows was cloned from old disk).During the windows install, SSD isnt visible in screen for select drive to install.SSD is connect to SATA...
View ArticleRe: SSD on Z440, Z420
you need to provide specific details, which model z system are you trying to do a new install the 440 or the 420 which model samsung ssd are you trying to install to
View ArticleRe: SSD on Z440, Z420
I try install on both machine (Z440 and Z420) - same problem.I installed same disk on older machine Z400. Without problem.Samsung 860 EVO 500 GB
View ArticleRe: SSD on Z440, Z420
connect the ssd to the SATA 0 port on either system (the blue or grey ports) have no other drives attached insert the windows 10 install usb key, you can create a install key by downloading the ms win...
View ArticleClik here to view.
Re: Ctrl+Alt+Del without a keyboard
The Ease of Access button is present and NOT disabled. However, it is only accessible after you pressing Ctrl+Alt+Del. After pressing Ctrl+Alt+Del is when I am presented with entering the logon...
View ArticleRe: Crisis Recovery Jumper Z620 Z420 Z820 Revealed
Hi I feel your pain - what problem I do recall mine needing lots of attempts have you done all the bios battery pulls and stuff, there is a password reset jumper too On the front of my z820 there are...
View ArticleRe: Crisis Recovery Jumper Z620 Z420 Z820 Revealed
Sounds wired....did you read about that pos error with nvidia graphic cards? The biosupdate is unable to finish with nvidia card, solution is to replace with simple gc to finish the bios update. good luck
View ArticleRe: Crisis Recovery Jumper Z620 Z420 Z820 Revealed
HP released an advisory for the ZX40 workstations that goes over their advised method of crisis recovery. It is currently available at: https://support.hp.com/us-en/document/c05163478 There is more to...
View ArticleRe: SSD on Z440, Z420
Ok, I check SATA ports for new SSD, It wasnt in right port. Now its works.Thank you.
View ArticleHP Device Manager 4.7 - How to install an application on a Thin Client
Hello all, How can I install an application on a HP Thin Client T620 with HP Device Manager 4.7? I want to install the Citrix Workspace application (.exe) on a device remotely. Does anyone knows the...
View ArticleRe: Crisis Recovery Jumper Z620 Z420 Z820 Revealed
Hi RTorres! (You prompted me to write here again and to thank SnowDej for all the help he gave me! Thank you man 🙂 ) DONT GIVE UP!Why? Because the actual solution I found was to put a different CPU in...
View ArticleAbout HP z600 & Radeon R9 280x
hi,i have a HP z600 workstations its 650w PSU doesn't enough suitable cables to power the r9 280xpsu have- 2x SATA and Molex (same rail)- 1x PCI Express (direct from PSU)how can i use adapters to power...
View ArticleRe: HP xw8200 Issues Trying to Boot into Windows 7 Pro, 64-bit OS
Hi, can you tell me if you ever resolved this issue and what caused the issue? I am having the same problem. I am not running windows, but Linux. Every time the xw8200 is shut down overnight it...
View ArticleTablet mode no Alt key
Hi, Just wondering. When using photoshop in tablet mode I can't find an Alt key on the pop up keyboard. Any ideas? Thanks in advance.
View ArticleRe: HP xw8200 Issues Trying to Boot into Windows 7 Pro, 64-bit OS
CMOS on this server (like most modern systems) no longer store the writable cmos settings in the RTC chip (which no longer exists) it's stored in one of the intel chips if a cmos setting is not...
View ArticleRe: HP xw8200 Issues Trying to Boot into Windows 7 Pro, 64-bit OS
I ended up by giving up on this xw8200 because it really wasn't worth the time and effort to keep on trying to breathe life into it. I purchased a pre-programmed BIOS chip from what I believe was a...
View ArticleRe: Z820 e5-2600 v2 ivy bridge upgrade - thread reactivation
I just saw this YouTube video https://www.youtube.com/watch?v=KNy-_ZzMnG0. It is not about flashing an HP Z820 but much of what is shown is similar to that @Scoobis and I did to upgrade V1 boards to...
View ArticleRe: Intel Network Card and Management Engine fail to initialize
I zoomed into the image you posted, but I cannot find a jumper at that location on my 8200 Elite SFF motherboard. Is it a poled jumper or just two holes for inserting a grounding pin? If it is the...
View ArticleRe: Intel Network Card and Management Engine fail to initialize
As mentioned, the jumper pins are labeled "FDO" (meaning Flash Descriptor Override) at the position seen in the picture. You need to supply your own Jumper to put on those two pins. If you can't find...
View ArticleRe: Intel Network Card and Management Engine fail to initialize
I found the FDO jumper location...far away from yours. Mine was closer to the USB and Ethernet ports. I'm exhausted now, but I will try your procedures in the morning. I only have 1 of 20 8200s with...
View Article