Re: Memory error message 201?
, welcome back to the forum. Here is the Maintenance and Service Guide for the computer. Beginning on Page 90 you will find the System Board Connections. Then, beginning on Page 91-94 you will find...
View ArticleRe: Memory error message 201?
Hi,thank you for the reply,I was indeed following those pages in populating the rams,they are two 4 GB rams, each works fine when I tried them individually at slot one (Black) but when I tried both one...
View ArticleLeft click selector on hard wired mouse doesn't work
When I am left clicking with my mouse I have to click numerous times to get it to select the function I want. I use AutoCad Civil 3D and I have to click on commands and snaps several times to activate...
View ArticleRe: Memory error message 201?
You are very welcome, . Thank you for the additional information. Like you, I would have thought that you would populate both black and both white slots. However, if you look carefully at the System...
View ArticleRe: USB flash drive not showing up in Boot Menu
Actually, these came with Windows 7 and then also have the 10 disc. But, honestly, RUFUS isn't the issue, the BIOS/UEFI is. They aren't even showing up when ESC/F9 is hit. They can't even been...
View ArticleRe: USB flash drive not showing up in Boot Menu
Then, assuming you tried resetting the BIOS to default and still do not see the flash drive, it is possible a BIOS fix might be needed. YOu should open a support case with HP so they can possibly...
View ArticleRe: HPDM 4.7 Update BIOS on T620
I can confirm what Adrian Brugger wrote -- you do need to copy the BIOS bin file to a directory such as /tmp and then run cd /tmp in your command order before executing the hptc-bios-flash command from...
View ArticleRe: USB flash drive not showing up in Boot Menu
Actually, before coming here, I did have a ticket setup with HP and they tried to send a tech out. I saw no point in that. I would have figured that would have been sent over to engineering and let...
View ArticleRe: Memory error message 201?
Hi, Thank you for the information. I did populated both black slots with 4Gb rams each,nothing in the white slots, I presume this population is correct, but it did not, now I tried the rams...
View ArticleRe: Upgrading Z1 Workstation (Mk 1), CPU / GPU options in 2016?
Xeon V3 processors is uncompatible by socket. 1245v2/1275v2/1290v2 is a maximum CPUs Colleagues, what you think - can be VGA from Z1 Gen2 an uncompatible with Z1 gen1?Now i have GTX770M inside and...
View ArticleHp Proliant dl160 gen9 seting up alerts
Hello, I'm setting up DL-160, having 5 sas disks as raid-5(1-failover disk) and installing Windows Server 2012R2 on top (not installing any Vsphere). Could anyone guide on how do I set-up 'Alerts' to...
View ArticleRe: Can't find windows server 2008 64 bit compatible drivers for HP Pro desk...
Windows 7 drivers not compatible can't install them on windows server 2008!
View ArticleRe: Hp Proliant dl160 gen9 seting up alerts
Hi: You may also want to post your question on the HP EBC Support Forum -- Proliant Servers section. http://community.hpe.com/t5/ProLiant-Servers-ML-DL-SL/bd-p/itrc-264#.V5nvU2b6u9I
View ArticleRe: HP xw8400: Black Screen after Added Bios Password
Removing the bios password reset jumper on the motherboard and resetting the bios/cmos solved the issue. Hopefully this helps someone else.
View Articleworkstation xw4600 E93839 front panel connector to the motherboard 18 pin
I have Workstation xw4600 motherboard E93839 front panel connector is a 18 Pin. I cannot connect the front panel such as power switch button, reset button, HDD LED, and etc. Is there a pinout schematic...
View ArticleRe: workstation xw4600 E93839 front panel connector to the motherboard 18 pin
Above on the left is this specific forum's search box, and if you type in pinout and then hit return you will find what you need. The HP workstations of this era (xw6400 xw6600 xw4600 etc) used very...
View ArticleJumpers on Z620 FMB-1102 motherboard
I am very curious to learn just what it is that the jumper between the PCIe slots on an FMB-1102 motherboard does. I have searched high and low but cannot seem to find any refernce to it in any...
View ArticleHPDM doesnt see any of my thin clients anymore
A few months ago I setup an HPDM server on Win 2012r2 along with 12 HP thin clients, Mainly mt245. I could see all of the thin clients with HPDM, I even used it to Image all of them. Yesterday, I went...
View ArticleRe: 929-Fatal MCA Error detected CPU 0
Hello,Did you ever get this resolved? what was the resolution?We have this same issue.
View Articlenon LSI or Adaptec PCIe SATA-3 controller card in xw6600 for improved...
I own a HP xw6600 workstation with two E5450 Xeon Quad Cores and 32 GB of - Quad Channel memory installed an one Samsung 850 Pro SSD as my main OS drive together with an WD Re 2 TB HDD. Investing in a...
View Article