Re: Windows 10 Upgrade Fails HP 8000 Elite USFF
you could be running into an issue (my guess) that there is no support for 32bit windows 10 for any system that has a 64 bit processor. I would try downloading/creating a usb upgrade flash key and see...
View ArticleRe: HP xw8400: Black Screen after Added Bios Password
I wanted to follow up on this post. Please let me know if you have any suggestions to get this xw8400 workstation up and running.
View ArticleRe: Z240 wont boot from M.2
I have Windows 10 booting via NVME on a Samsung 950 Pro. BIOS version: N51 Ver. 01.21 03/02/2016 I beleive I am using BIOS defaults. Option ROM Launch Policy is set to "ALL UEFI" I don't see the...
View Article(Server) POST Error Message or Information.
Hello, there are a couple servers I have been working on, and they seem to be fine; except for one thing.....after POST is about finished, a faunt pops up in bright Yello stating "There is an error or...
View ArticleHP CORE O DEOP PC AND I GOT ERROR
dc7800 smart card error 26/07/2016 6.PM Hi, I've got a dc7800 Small Form Factor system. It was working fine but after a reboot it won't start up normally anymore. The black POST screen appears, RAM...
View ArticleRe: Z400 Aftermarket Upgrades
SDH wrote:Setting the processor in place..... 2 fingers used, front to back, not side to side, because your fingers will fit better and you will have best final control. "Back" is the processor...
View ArticleRe: USB flash drive not showing up in Boot Menu
Rufus has lots of options that could conflict with BIOS settings Create a bootable USB key by using Diskpart...
View ArticleRe: Workstation Configuration Advice
it all depends on what is the use for the workstation. Perhaps listing the apps you will be using will help us guide you. Be aware that the 128GB dimm memory cards to get to the 2TB limit are yet to be...
View ArticleRe: Can not install windows 7 on new Elite desktop 800G2
As FYI, if your system came preloaded with Windows 10, then you need to change the BIOS to UEFI w/compatibility mode (or legacy) and to Disable SecureBoot, as this is not supported by Windows 7 ALso,...
View ArticleRe: Can't find windows server 2008 64 bit compatible drivers for HP Pro desk...
The best you will be able to do is try Windows 7 drivers. HP does NOT test or provide WIndows Server drivers for ANY PC or Laptop. Only client operating systems are supported on thes platforms
View ArticleClik here to view.
Re: Problem with recovering a Z210 system backup when changing RAID...
It's been a while since i raised an issue about faulty IRST drivers made available by HP for use in my "in warranty" z210.And one year later, still no action by HP as they have yet to update to the...
View ArticleBest practice for SATA cabling in z210 when HDD configured in RAID5
My z210 motherboard has the following SATA connectors: blue connector marked SATA0 running @ 6Gb/sblue connector marked SATA1 running @ 6Gb/sblack connector marked SATA2 running @ 3Gb/sblack connector...
View ArticleClik here to view.
Re: Z400 Aftermarket Upgrades
I have seen the document Processor Option Installation Instructions for HP ProLiant BL460c Server Blades which describes the use of an installation tool. A snippet from doc is included below: I've...
View ArticleHp z840 Thunderbolt card Internal Connectors
Hello AllCan not find the internal connector cable for Hp Z840 Workstation. part number for "751366-001".At leastI can finda picture of the wiring diagram will be enough.I'm having problemswith the...
View ArticlePlease I need pinout front IO HP DL370-B6 HP 606200 001
Product Name: HP DL370-B6 HP 606200 001 I have hp HP DL370-B6 HP 606200 001. Unfortunately I lose front IO . Currently I am trying to trip the prongs on the mother board to try and get it to post so I...
View ArticleRe: Workstation Configuration Advice
Thanks a lot for your response. I actually want to use the system basically for fluid simulation in Realflow and 3D and Visual Effect Project Renderings. I'm actually thinking of having a system that...
View ArticleClik here to view.
Re: Z400 Aftermarket Upgrades
Skylarking.... Google is a wonderful thing.... Here's another tool also used for the HP ProLiant WS460c G6, which runs some of the LGA 1366 socket processors, and I think I found a source for these...
View ArticleRe: Please I need pinout front IO HP DL370-B6 HP 606200 001
Hi: You may also want to post your question on the HP EBC Support Forum -- Proliant DL Servers section... http://community.hpe.com/t5/ProLiant-Servers-ML-DL-SL/bd-p/itrc-264#.V5iwqmb6u9I
View ArticleRe: Windows 8 t520 Thin client failures / consistent crashes
No luck on our end. We didn't get as many as you and have essentially just been biting the bullet and replacing the thin clients with the good OS as they die, instead of re-imaging.
View ArticleMemory error message 201?
I tried to upgrade my HP Compaq 8200 Elite SFF PC to 2 X 4Gb Rams PC10600 DDR3 1333 modules,I tested each module in slot 1 (Back slot in top) and the PC boots fine no error message,I then tried both...
View Article