Clik here to view.
Re: HP z820 Win 10 x64 - how to find my RAID disks
Drivers for the Z820 can be found here, just select the OS of choice....If not already done, i'd apply the chipset drivers and the Intel Rapid Storage Drives and see if that resolves the problem. But...
View ArticleRe: Z400 Aftermarket Upgrades
keep the RAID+AHCI setting, as this is still better than IDE mode which is primarily intended for legacy operating systems (XP and earlier) which cannot handle SATA drives. If you cannot go without...
View ArticleRe: z420 doesnt increase fan speed as CPU temp goes up
I can change minimum fan speed and it does make fan speed go up and cools my cpu way better bringing temps down, but doing it this way keeps my workstation loud all the time. I also updated to the...
View ArticleRe: Windows 8 t520 Thin client failures / consistent crashes
Sorry to report that this did not resolve the issue, we tried on a couple machines and they both were hit with blue screens.
View ArticleClik here to view.
Re: z200 mobo front panel pin out and new PSU
The front panel connector, P5, is a 2x9 pin header. The pinout is below: Odd pins are on one side, even on the other. The key pin 14 is missing, so one can identify the odd and even rows by the...
View ArticleRe: Z400 X5690 W3690 Fastest Processors
SDH, you are very experienced with setting up and increasing system performance on HP Workstations, but I have some comments for others. - A Z400 with 6 DIMM slots and boot block date 11/10/2009...
View ArticleRe: z200 mobo front panel pin out and new PSU
I figured out 6,8 (power on) by myself, but was unsure of the others. This information will be quite helpful, hopefully to others as well as myself.
View ArticleRe: Z400 X5690 W3690 Fastest Processors
Thank you, Dan.... I thought I had seen that in a HP communication somewhere, but am glad to hear that we can just use what makes sense. Version 1 and Version 2 (with boot block dates being the key to...
View ArticleRe: Windows 8 t520 Thin client failures / consistent crashes
Ok thanks for the heads up... I'll open a case with HP support and will report back if I make any break throughs...Have you had any luck on your end? We're averaging one dead Thin client every week...
View ArticleRe: Z400 Aftermarket Upgrades
That's my fear. I only have either IDE or Raid+AHCI. Right now it is at Raid+ AHCI...So I leave it like that then..
View ArticleCan not install windows 7 on new Elite desktop 800G2
Product Name: EliteDesk G2 TWROperating System: Microsoft Windows 7 (64-bit) I update bios new version 2.15VI using network image Windows 7 64 bit
View ArticleRe: Can not install windows 7 on new Elite desktop 800G2
Hi: Please see this discussion... http://h30434.www3.hp.com/t5/Business-PCs-Workstations-and-Point-of-Sale-Systems/can-not-install-windows-7-on-new-Elite-desktop-800G2/m-p/5566065/highlight/true#M11888
View ArticleRe: XW6600 + GTX 760 ?
Final update: XW6600's PSU is perfectly capable to power GTX 1080 FE. Unfortunately, even two E5450 are not enough to feed the beast with data fast enough. GTX 970 seems to be max. what can be...
View ArticleRe: Z400 Aftermarket Upgrades
Most of the HP workstations I work with do not offer "AHCI" as an isolated BIOS setting. Rather, AHCI is included in the advised setting. Both the BIOS settings of "RAID + AHCI" or "RAID" result in...
View ArticleClik here to view.
Re: Graphics Card upgrade for HP Compaq Elite 8300 SFF PC
I've recently purchase the same computer ( HP Compaq Elite 8300 SFF PC) and notice that this is an older post. Do you know if this computer will work with a newer "AMD Radeon HD 7450 2048MB/2GB GDDR3...
View ArticleClik here to view.
Re: Z400 Aftermarket Upgrades
Today I finally received my 850 EVO and can tell it's fast. But I am confused since the Samsung software says the drive is not setup in AHCI when the BIOS clearly says RAID+AHCI..
View ArticleRe: BSOD when I sysprep ProOne 400 G2 with Windows 10
You Sir are a life saver, remember not all heroes wear capes (Y)Thanks, so much.Though I experienced a new BIOS version doesn't fix it for ProDesk 400 G2, unfortunately, but your tip ended my desperation.
View ArticleRe: Z400 Aftermarket Upgrades
The Samsung Magician software has been reporting that HP workstations using Samsung SSDs are not using the AHCI drivers for years, incorrectly. Use this forum's search box and type in Magician and...
View ArticleRe: z420 doesnt increase fan speed as CPU temp goes up
there is no reason to panic.85 degrees is high but not critical for a Xeon processor.If you increase the idle fan speed in BIOS the workstation should not be very loud.Don't go up to the max, just one...
View ArticleVersioning for image
Hi, On our premises, we use about 250 HT T610 Thin Clients, wich are managed by HP Device Manager 4.5. I updated an existing image with the latest security updates and some other software changes. I...
View Article