Re: Shadowing t5550's
Ok thanks. I tried this and it seemed to set the password on the unit but still getting the same error . Have restarted the unit after sending the settings but still no go
View ArticleCan't find windows server 2008 64 bit compatible drivers for HP Pro desk 400 g3
Hi, I have just purchased a HP Pro desk 400 g3 computer that i need for windows server 2008 to be running on. However after install i culdnt find drivers for windows server 2008. So far i managed to...
View ArticleClik here to view.
Re: Usb 3.1 adapter in a Z600 workstation
Agree.... that card should work in a Z600, but will it work to the USB 3.1 10Gbps speed standard? No. The HP Z600 workstation has no PCIe generation 3 slots. It has 3 PCIe Gen2 slots, 1 PCIe Gen1...
View ArticleRe: Usb 3.1 adapter in a Z600 workstation
Thanks for the replies. SDH's reply about the speeds is very informative and saved me the expense of purchasing a card that would not deliver the promised speeds.
View ArticleRe: Usb 3.1 adapter in a Z600 workstation
Happy to help..... perhaps instead you'd want to install one of the TI-based USB 3.0 cards that were originally created by HP to bring USB 3.0 to the Z400/Z600/Z800 and other fast workstations with a...
View ArticleRe: Z400 Aftermarket Upgrades
Thank you! Checked again and thankfully no need for the X5680. Found another W3680 at a good price from USA.At the moment there was one at an even lower price coming from USA vs a W3680 coming from...
View ArticleRe: Prodesk 400 G2 Microtower - after latest bios update received 512 - rear...
Bios 2.47 solved the issue in my case!
View Article3rd SSD doesn't work when connected - HP Z420 Tower workstation
we have 2 SSD connected on the Gray connectors. When I try to connect a 3rd SSD on white or black connectors, the SSD isn't recogonized even in Bios. Sata (0) and Sata (1) are recogonized I tried to...
View ArticleRe: 3rd SSD doesn't work when connected - HP Z420 Tower workstation
Is the third SSD the very same specification type?
View ArticleRe: 3rd SSD doesn't work when connected - HP Z420 Tower workstation
That certainly could be the problem. Memory types (TLC) ( MLC) and controller types have a great part to play in compatibility with specific motherboards. Certain types will work and others not. What...
View ArticleRe: 3rd SSD doesn't work when connected - HP Z420 Tower workstation
Well when I swap the connectors, connecting the new ssd to Gray it gets detected
View ArticleRe: 3rd SSD doesn't work when connected - HP Z420 Tower workstation
Then it could be either a bad connector or perhaps the port.
View ArticleRe: 3rd SSD doesn't work when connected - HP Z420 Tower workstation
Well none of the 4 white and 2 black work. Could all of them be a problematic?
View ArticleRe: z420 doesnt increase fan speed as CPU temp goes up
in F10 BIOS Setup you can increase the idle fan speed.You should also check if there is a newer BIOS available for download.
View ArticleRe: 3rd SSD doesn't work when connected - HP Z420 Tower workstation
There is a block diagram in the manual that shows all of the components. There may also be an image which shows which ports are SATA 3 GB\s and 6 GB\S. I will take a look and post a link to the pdf...
View ArticleRe: Z400 Aftermarket Upgrades
afaik the only difference between X5690 and W3690 is the number of QPI links, 2 vs. 1 because the 5690 was made for dual processor machines like Z600, Z800 etc. If you need more power, the good old...
View ArticleRe: Z400 Aftermarket Upgrades
Yes thank you! that info will come in handy! after I install the 850 EVO, I will remove the SAS raid card, 3 SAS HDDs and one Of the two Quadro FX580 cards.... I actually hope my power consumption will...
View ArticleRe: Z400 Aftermarket Upgrades
You're welcome. I forgot to mention that your SSD won't run in AHCI mode. Of course the integrated S-ATA controller is capable to run in advanced mode which is very important when a user plans to...
View Article