processor
HiI want to upgrade my pc from intel p4 to core 2 duo 2.5 ghz processor....is my motherboard will support this chip...pleas tell me
View ArticleHP NETSERVER LH 6000
My son picked up this server. It has 6 18.2 go hard drives. It has 4 700 my processors. The machine starts but it says no operating system. I can not get it to boot off of the IDE cd rom. I have...
View ArticleRe: hp xw8600 workstation update new vga
I'm using the Quadro 2000, Quadro 2000D, and the Quadro K2000D in our xw6600 and xw8600 builds. Those work fine there, and in our Z620 builds. Our workhorse workstations for medical imaging still use...
View ArticleRe: processor
Formanite, welcome to the forum. Here is the Technical Reference Guide for the computer. On Page 53 you will find the information on the compatible processors. Read all of the information on that...
View ArticleClik here to view.
Re: HP NETSERVER LH 6000
Hello there Perhaps this may help... CobblerCobbler is a Linux provisioning server that centralizes and simplifies control of services including DHCP, TFTP, and DNS for the purpose of performing...
View ArticleRe: Compaq 6000, 2 beeps with red light [video inside]
Hello, Same problem... any ideas? Tx
View ArticleClik here to view.
Z420 Workstation troubleshooting in Install Windows
Dear HP experts,Thank you for your time I need an advice to istall windows 7 Ultimate x64 on HP z420 workstation . I have tried alot but an error of ((No device driver were found)) is always shown.Just...
View ArticleRe: Z420 Workstation troubleshooting in Install Windows
<EDIT.... deleted..... double post>
View ArticleRe: Z420 Workstation troubleshooting in Install Windows
I also have run up against this issue, rarely, in the past with HP workstations and their optical drives. It turns out some of the ODs have been old SATA versions that needed a firmware update an then...
View ArticleRe: Z420 Workstation troubleshooting in Install Windows
Thank you Sir I tried your solution.. but the same...there is no hard drive to install windows on it.I do a copy-paste of my previous issue on Z820 because it's the same problem but on a different...
View ArticleRe: z400 - 6 slot memory configut=ration
Before we go further, I need more information about the modules (brand, model, voltage, timings).You can also attach images if you're unsure. After that we'll go on and check if one of them is faulty.
View ArticleRe: hp xw8600 workstation update new vga
Thanks for repply. How about GTX ? It work fine with my pc ? because i use lumion. Waitting your repply...
View ArticleNo reboot after BIOS change
In our organization we have 2 types of thin clients (TC). We have the T620 and the T5740 both are running W7 On these TC we want to apply a new BIOS setting. We want to enable wake on lan, so it’s...
View Articleon/off switch faulty on HP ProDesk 400 G2
My ProDesk 400 G2 is 5 months out of guarantee and the on/off switch has been a little tricky to get on recently. This morning it would not switch on, but when I tried this afternoon it did come on....
View ArticleRe: hp xw8600 workstation update new vga
For our medical work we need to use the DICOM grayscale drivers that are available for the Quadro cards.... there are posts in the forum about others using GTX cards. There is a difference in quality...
View ArticleClik here to view.
BL460 boot PXE absent
Hi alli've a strange situation after firmware upgrade install I've installed the latest available firmware (on HP site) for the BL460C Gen8, but after all the procedure, i don't know why, there was no...
View ArticleRe: z400 - 6 slot memory configut=ration
These are Mushkin Stelleto:998770 DDR3 UDIMM (6x4GB) 24GB PC3-10666 9-9-9-24 1.5V I tried swapping out different sticks of RAM to see if one was bad - no difference, all errored when put into slot 2
View ArticleRe: Z420 Workstation troubleshooting in Install Windows
Two things that might help.... First, I can tell you that I have had several horrible experiences with loading W7Ultimate64 versus loading W7Pro64. I built up a xw8400 for a friend of my son, and had...
View ArticleRe: z400 - 6 slot memory configut=ration
ok, at this point I assume you have checked each memory module in single mode.If not, you should catch up on doing it because the next step is the last resort.Apart from that, the RAM specs look fine....
View ArticleRe: Z420 Workstation troubleshooting in Install Windows
If you have more than 1 disk in your system, and you have RAID+AHCI set, then you likely need to jump into the raid controller BIOS at boot time (by pressing "CTRL C" if i recall correctly) and define...
View Article