Quantcast
Channel: All Business PCs, Workstations and Point of Sale Systems posts
Browsing all 36016 articles
Browse latest View live

Re: Upgraded video card to GTX 1070. Do I need to upgrade power supply?

You are welcome, .

View Article


What RAM to use for upgrade

I need more RAM. There are 2 PCs.  One has 2GB; the other has 4GB.  It's not enough.  I don't know what Ram needs to be added.

View Article


Re: What RAM to use for upgrade

Hello HP ProDesk 405  System Memory Part Number : B4U36AA  ( HP 4GB DDR3-1600 (PC3-12800) DIMM )Part Number : B4U37AA  ( HP 8GB DDR3-1600 (PC3-12800) DIMM ) Check below Links...

View Article

Re: What RAM to use for upgrade

, welcome to the forum. Here is the memory that is recommended by Crucial Memory: http://www.crucial.com/usa/en/compatible-upgrade-for/HP-Compaq/hp-prodesk-405-g1-tower...

View Article

Re: HP Device Manager sends task, but doesn't finish

Where do you add in the dhcp/dns entries. I cant find anything in the HPDM manual or anywhere in the HPDM console to add them

View Article


Re: Power supply upgrade for HP z230 tower

Please find the HP tested and compatible power supply as given below, Power Supply - HP Z230 Tower Workstation400 watts wide-ranging, active Power Factor Correction, 92% Efficient320W Standard...

View Article

Re: 929-Fatal MCA Error detected CPU 0

We have seen replacing system board has fixed the issue.In rare cases processor.

View Article

Re: How to make a Nvme Z turbo drive G2 bootable on Z230

anyway thanks dan! I have tried a AHCI G2 and it could be booted. But I am eager to know where there is way to make an NVMe Z turbo bootable on Z230. Any method?

View Article


Re: z240 boot issue with dual monitor setup

I contacted HP support. They said the problem was known and resolved in BIOS 1.27.I upgraded and it's a few days the user doesn't lament the problem anymore.

View Article


Re: How to make a Nvme Z turbo drive G2 bootable on Z230

NO method. The BIOS will not be able to find an NVME controller to boot from. It does not have the NVME code to see such device as boot media. The Z240 has that feature with its BIOS

View Article

Re: LSI Mega Raid Card recommendation (later Model suggestions)

Hi LSI 9280-8E is not tested on z600 Please find the The RAID controller options and tested RAID cards on this unit. SATA RAID** 0, 1, 5, and 10 support standard on motherboardSAS RAID 0, 1, and 10...

View Article

Re: HP Z840 bios v2.21 - need help verifying virtualization option in bios

did you check under Advanced->System Security

View Article

Re: Z440 Recovery Manager Missing

If the recovery partition is avaialable you can initiate the recovery by tapping f11 on start up. But if recovery partition is not available then you can always call hp support and request for a set of...

View Article


Re: How to make a Nvme Z turbo drive G2 bootable on Z230

could I get any third-party bios, driver or firmware instead of the original bios or ssd f/w ? btw, dan, do u know the product model of new z turbo G2 1T? is it Samsung SM951 1T?

View Article

Re: How to make a Nvme Z turbo drive G2 bootable on Z230

HP commercial systems use an HP bios. There are no other options.

View Article


Re: CPU fan not detected - error 511

I am not familiar with the HP Pro 3515 MT, but on other products (like Workstations), the fan speed is detected by the BIOS, before the OS is loaded.  Upgrading from Win7 to Win10 should not cause fan...

View Article

Re: Z240 POST Message disable?

The Z240 SFF blue front USB3 2x10 header pinout is the same as the Z420 front USB3 2x10 header, as SDH pointed out.  This USB3 pinout uses the Intel-specified header and pinout.  The only difference is...

View Article


Re: Is Unbuffered ECC RAM Reducing CPU Performance in a z620?

The reason registered memory is specified for 8GB DIMMs is to reduce the DIMM's electrical loading on the memory channels, which improves signal integrity.  Registered memory typically has more ranks,...

View Article

Re: CPU Install on HP Z840

was this issue ever resolved ,im having the same problemthanks

View Article

Re: 8300 Elite won't boot from USB flash drive

 Take the CMOS battery out press CMOS Reset switch on the systemboard put the CMOS battery back, Restart the unit set date and time in the BIOS and check if that helps. 

View Article
Browsing all 36016 articles
Browse latest View live


<script src="https://jsc.adskeeper.com/r/s/rssing.com.1596347.js" async> </script>