Re: usb ports not providing enough power
The scanner manufacturer is insisting the scanners do not require more than 500mA of power, so I'm not sure if they are incorrect and the scanner is in fact requiring more power, or if there is an...
View ArticleRe: Admin switch password on t520 w/TP6.1
Well, I re-flashed the t520 using exactly the same USB image (didn't even re-create the USB key), and this time it behaved differently. Before, there were at least 3 reboots with the message about...
View ArticleCompaq 6005 pro small factor pc
I have a copmaq 6005 pro sff for friest my boot menu was blue i don't know that version but when my system has fail and i'm get it to a serviceman he repair it with bios version 1.17 now when system...
View ArticleRe: Windows 8.1 for HP Z240
WaqasKhalid Hello;Allow me to welcome you to the HP forums!It's generally a BAD idea to replace the preinstalled OS on a prebuilt PC with a different version. This is because the preinstalled PC comes...
View ArticleRe: Clean install Windows 7 Ultimate. Intermittent Crash. No BSOD. Bootmgr is...
Scott, An interesting set of events / conditions. As I had had good results with Ultimate on a Pentium 4 630 which was in the first batch of 64-bit Xeons, it seemed that the two or three generation...
View ArticleRe: Computer can't boot
Finally I got the solution. The problem was on the switch, when I changed the switch, the computer was well to start normally.
View ArticleRe: Windows 7 does not recognize any hard drives, but the DPS self test runs
Thanks for ythe reply. I am unable to go to disk management screen as Window will not load. My system was windows 10, upgraded from Windows 7. My repair disk is windows 7 as my SSD had the Windows 10...
View ArticleHow to program a prefix into a barcode scanner
This question likely has a very simple answer (and my excuse for it is that it's Monday ;-)... I'd like to program a "%" as a prefix into our barcode scanner, and I've read through the user guide and...
View ArticleRe: Elite 7300 does not boot
Same problem my case. We have hp elite 7300 desktop 2 ps. One no booting another one good working. We change bios ic. Bios bin file. No working. Display stand by hanging.
View ArticleUpgraded video card to GTX 1070. Do I need to upgrade power supply?
My Z640 has a 925w poer supply but the only 6-pin power plug I find remaining isn't sufficient to power my GTX 1070 video card under heavt use. It requires 2x 8-pin power plugs and the adapter I have...
View ArticleRe: Windows 8.1 for HP Z240
Although not offered preinstalled, Windows 8.1 x64 (Professional and Enterprise edition) is in fact a "supported" operating system on this model. Drivers and sofware are avialable for download from HP...
View ArticleRe: Upgraded video card to GTX 1070. Do I need to upgrade power supply?
, welcome to the forum. Here is the Maintenance and Service Guide for the workstation. I contacted StarTech to see if they would have a "Y" adapter that had two 8-pin power connectors. However, the...
View ArticleILO Session Idle Timeout / Auto Reset Connection
There is no Servers Board by the way . So sorry to disturb ! Hello, We have several HP Servers and ILO 4.x versions. I need to know is it possible to create an auto timeout a user session if that user...
View ArticleRe: Windows 7 does not recognize any hard drives, but the DPS self test runs
If the drive(s) are not assigned a drive letter, partitioned or fomatted, CMD console or shell itself is not going to see the drive, that requires an app/utility with direct disk (BIOS) access like...
View ArticleBitlocker - Networkunlock with 8770w
Hello, i have a problem with a 8770 workstation.Im using Bitlocker with Networkunlock and it works with new Clients (HP ZBook 17 g1/g2/g3 HP 850 G1/G2/g3) but with the 8770w i get the pin request every...
View ArticleRe: How to program a prefix into a barcode scanner
Never mind - found it in the programming guide - as suspected - yesterday being Monday meant my brain wasn't quite functional yet so I missed the applicable section in the programming guide. ;-)
View ArticleRe: ILO Session Idle Timeout / Auto Reset Connection
Hi: HP split the forums into two kinds...one for PC's and printers, and another for servers, switches, etc. You may want to post your question on the HPE Community Support Forum -- Proliant Servers...
View ArticleRe: Windows 7 does not recognize any hard drives, but the DPS self test runs
I think that I tried diskpart in the CMD Prompt. When I get back in town later this week, I will try it again. I did not change anything in BIOS except after the failures began, I reset the BIOS...
View ArticleHPDM 4.5 issue with 2 subnets.
Hello, I am having issues with my HPDM 4.5 login, I am able to login using the console when I am on the server side, but I can not do it from my laptop. The only change we made is that we added...
View Article