Reinstall Windows on Elite 8300
I want to reinstall Windows in my elite 8300. I have formatted the drive in windows installation process. After that installation can not go through. it always says need drivers for hard drive. What...
View ArticleRe: Reinstall Windows on Elite 8300
Hi pethua, How are you installing Windows? Are you using discs or a USB drive?Also, is this the same version of Windows that was on the PC to begin with? Have you tried updating the BIOS before...
View ArticleRe: Reinstall Windows on Elite 8300
you may want to call HP Support and obtain the Windows media that came with your computer either 32-bit or 64-bit version. Our OEM Windows media has all drivers required to support any option in the...
View ArticleClik here to view.
Re: workstation xw4600 E93839 front panel connector to the motherboard 18 pin
The xw4600 front panel 18 pin connector is called P5. The pinout is below (this has been posted in a previous thread) Thermal+ and Thermal- go to a thermal sensor that measures air temperature as it...
View ArticleRe: Reinstall Windows on Elite 8300
If network is avaliable, please try to do a Windows Update, which might fix most of your problems. If there is no network driver, please use another PC to download the corresponding drivers from HP...
View ArticleHP ProOne 400 G1 not turn on
Hello! My HP ProOne 400 G1 will not turn on. Only beeps 4 times. What could it be?
View ArticleRe: HP ThinPro license question
Thanks guys!I removed thecodecs and installed the necessary drivers.It works smoothly!
View ArticleRe: HP ProOne 400 G1 not turn on
4 beeps normally indicated faulty power supply. Please contact the Hp support to check and order power supply for the unit.
View ArticleRe: Z620 keeps shutting down even before showing HP logo
Suggested steps to try:1.Try bare minimum configuration only with hdd, processor and memory - disconnect the optical drive.2.Try resetting CMOS.3.If the unit has dual processor, remove the Riser...
View ArticleRe: hard drive controller for to run raid 1
Hi Yes the RAID card :LSI 9217-4i4e 8-port SAS 6Gb/s RAID CardYYE0X20AA is supported on z440 workstation. to run RAID 1 on 2X HP 1TB SATA 6Gb/s SSD for workstation Z440.
View ArticleClik here to view.
Encountering BSOD (Page fault in a nonpaged area)
Hello there, I am repeatedly encountering the BSOD on my Z230 Workstation (Windows 8.1 Pro 64), system saying “There was a problem with the computer and it needs to be restarted” (screenshot attached)....
View ArticleRe: hp z820 4T storage disk
The maximum size of the hdd hp tested on this unit is SATA Hard DrivesSATA (Serial ATA) Hard Drives for HP Workstations3.0TB SATA 7200 rpm 6Gb/s 3.5" HDD - 4TB hdd has not been tested on this unit....
View ArticleRe: Z840 POST Error 932-Warning one of QPI links is not operating
Please contact support and request for system board replacement in the unit to have the issue fixed.
View ArticleRe: Upgrade HP Elitedesk 800 G2 Power Supply
Hi please find the standard Hp tested power supply configuration and graphics card option for 800 G2 series desktop PCs.GRAPHICS System Integrated GraphicsDMSFFTWRAiO Intel® HD Graphics on all...
View ArticleRe: HP Z400 - Upgrading PSU
Hi please find the hp tested power supply upgrade options on this unit:Power Supply475 watts wide-ranging, active Power Factor Correction, 85% EfficientThe Z400 475W power supply efficiency report can...
View ArticleRe: Z420 dead after BISO update?
It is a clear indication BIOS flash has failed and has corrupted BIOS firmware .Please log a warranty call for system board replacement for the issue to be fixed.
View ArticleRe: hp z820 turns on and turns off
If power supply swap has not fixed the issue - it is most likely system board.However i would suggest to try few steps to check if that fixes the issue.1.Try Bare Minimum configuration with only...
View ArticleRe: Z240 POST Message disable?
Are there any manufacturers that make an adaptor that’s available for purchase? We don’t want to do anything that could damage the PC or void warranty.
View ArticleRe: Z240 POST Message disable?
As to your question... there is no market for that..... so no. If you take a look at the schematic Dan provided you'll see there are several wires on both sides of that header that go to ground. If...
View ArticleRe: 8300 Elite won't boot from USB flash drive
Thanks, that did it. I had previously loaded Setup Defaults in BIOS before and after the BIOS update, saved and exited then tried again, but nothing changed. Loading Setup Defaults usually...
View Article