I want to install a graphics card but am unable to because I can't unlock this mechanism holding the blank plates in place.
Anyone know how to do this? Thanks
I want to install a graphics card but am unable to because I can't unlock this mechanism holding the blank plates in place.
Anyone know how to do this? Thanks
Hello
there are the manuals but that doesn't help
it seems to me that we do not even see this piece
https://support.hp.com/us-en/product/hp-z2-tower-g4-workstation/20063240/troubleshooting
Illustrated Parts
The best I've found so far is this, but you have to understand, I don't know if this will help you!
Hi all,
Any help confirming if there is any AV available for this platform is greatly appreciated!
the xw8600 uses something similar, look carefully at the black plastic piece, see the two small cutouts in the silver metal edge with black showing? those are the hinge tabs for the large black plastic pieces which swings up (or out in the picture orientation)
there will be one or two locking tabs near the area where the blue stripe is, and usually you press in or down the blue stripe to remove the catch that locks the black plastic piece down, once the latch is pressed you should be able to swing the black plastic piece away from the motherboard and remove it,.... once this is done the small black piece that sits above the video slot is removed by pressing down on it while pushing it up towards the case fan or by pulling it away from the motherboard
you can now swing up the metal holding plate and access the installed cards/slot plates
UPDATE Z400:
CPU: x5690
PSU: 475 watt
Ram: 32gb
GPU: Nvidia 1060 3gb
SSD: RAID0 2x Crucial_CT250MX2
HDD: RAID0 2x 1tb Hitachi drives
FAN: Extra 80mm high airflow fan ( from a server ) at the front
Hello!
At booting I see this post error:
It happens after installing a PCI card in the slot 1.
I tried to clear CMOS, and update the BIOS to 2.50, but it is still showing in every boot up.
Do you know what can I do?
Thanks in advance.
well a start might be specifying the card you are inserting in slot one and then describing any other installed cards
and also confirming the error msg does not show if that card (or any other is removed)
Dear Experts!
I would like to know that what options are available for me if, I would like to upgarge my HP XW8400 with a Motherboard and a Processor but using the same components from current system. My current system configuration is as follows:
Kindly advice me which motherboard and twin processors, I can buy which can be fit in the same HP casing (or may be can opt for customized casing if required). I would like to complete my project with possible minimum cost and somehow competing the latest available configurations.
Many Thanks
AMA-UAE,
Upgrading older systems can be quite rewarding in that they can have such dramatic improvements for so little cost.
I was given a Dell Precision 390 and Dell Dimension E520 from 2007 by an architect's office that was closing. They were going to be simply thrown away, but were in such beautiful condition it was a shame to toss them.
The performance of these- which were all completely original including the hard drives, was not very good:
Dell Precision 390 (2007) (Original): Intel Core2 Duo E6300 2-core @ 1.86Ghz / 2GB (2X 1GB) DDR2-667 ECC > Quadro FX550 / 2X WD 320GB ( RAID 1) / 375W
[Passmark Rating = 397, CPU = 586, 2D= 339, 3D=75, Mem = 585, Disk = 552 ]
Dell Dimension E520> CML (2006)( Original): Pentium D 830 dual core @3.0GHz > 2GB DDR2 667 > GeForce 7300LE > 2X Dell 19" LCD > Windows XP Professional 32-bit
[Passmark system rating = 384, CPU = 613 / 2D= 248 / 3D=72 / Mem= 562 / Disk=521]
As these systems are worth so little, I checked Passmark baselines results for the highest rated of each model and keeping the power supply limits in mind, then shopped for a good price on the components that produced the best results, plus used some parts lying about from other systems.
Fortunately, when the systems are worth so little, the parts are also very cheap and I bought the Xeon X3230 (4C @ 2.67GHz) for $32 ($15 now) and the Core2 Quad Q6700 4C@2.66GHz at $26 ($13 now). The Quadro K2200 4GB was $61 and the GT 440 1GB was $34. Memory was not expensive- about $9 for each 2GB module. The drives were a couple of WD Blue 500Gb lying around.
The results of the upgrade was noticeable:
Dell Precision 390 (2007) (Rev4): Xeon X3230 (4C@ 2.67GHz) / 8 GB DDR2-ECC 667 ECC / Quadro K2200 4GB / WD Blue 500GB + WD 320GB /Creative Audigy 2ZS SC > Windows 7 Professional 64-bit 7.18.18
[ Passmark PT9: Rating = 1464 / CPU = 3408 / 2D= 431 / 3D=3286 / Mem= 863 / Disk= 514] [STM= 1051] 7.27.19
The 390 is soon to have a spare Samsung 850 EVO 250GB which should liven up the disk system.
Dell Dimension E520 (2006)( R4): Core2 Quad Q6700 4C@2.66GHz / 8GB DDR2 667 / GeForce GT440 (1GB GDDR5) / Windows 7 Professional 64-bit / WD 5000AAKX + WD 3200AAKS 320GB (=Orig C:) > HP 2711x 27"
[Passmark system rating = 1498, CPU = 3417 / 2D= 431/ 3D=1040 / Mem= 775 / Disk=860] [STM= 1040] 8.17.19
Because of the limited value of the system, I suggest considering this approach to the HP XW8400, that is; search performance baselines for example on Passmark and upgrading the CPU, GPU, and drives accordingly.
Here is the highest- rated HP XW8400 on Passmark of 156 systems tested:
Rating: 2102
CPU: 6867 _ Xeon X3565 (4C@3.0Ghz)
2D: 398 _ Radeon HD 6850
3D: 2210 _ Radeon HD 6850
Memory: 761 _ 3GB
Disk: 2036 _ Liteonit LJT-256L6G-11 M
The highest rated component in each category:
CPU: 6942 _ Xeon X3565 (4C@3.0Ghz)
2D: 614 _ Quadro FX 1700
3D: 5103 _ GTX 1050 Ti
Memory: 783 _ 12GB
Disk: 4320 _ Volume 0 = meaning a RAID O The highest listed drive is 2789 with a Samsung 860 PRO 512GB
In my view, given the time and cost, it is not worth changing the motherboard or modifying anything. If the eventual performance is not satisfactory, consider selling the current system and buying a good HP z420, which are very reasonable today. In the UAE one might be able to buy from Ebay DE or UK.
I bought a z420 in 2017 for $136:
HP z420_3: (Original) Xeon E5-1607 (4-core / 4 Thread @ 2.8GHz) / 4GB (1X 4GB DDR3-1866 ECC unbuffered / NVIDIA GeForce 7100 GS / WD Blue 500GB / 400W PSU > Windows 7 Professional 64-bit (HP OEM ) > HP 2711x 27" 1980 X 1080
[Passmark System Rating: = 569 / CPU = 5492 / 2D = 538 / 3D = 60 / Mem = 1117 / Disk = 864 ] [Single Thread Mark = 1509] 9.27.17
HP z420_3: (2015) (R12) Xeon E5-1650 v2 (6C@ 4.3GHz) / z420 Liquid cooling / 32GB (4X 8GB DDR3-1866 ECC registered / NVIDIA GeForce GTX 1060 6GB/ Samsung 860 EVO 500GB + HGST 4TB / ASUS Essence STX / Logitech z2300 2.1 / 600W PSU > Windows 7 Professional 64-bit (HP OEM ) > Samsung 40" 4K
[Passmark System Rating: = 5644 / CPU = 15293 / 2D = 847 / 3D = 10953 / Mem = 2997 Disk = 4858 /Single Thread Mark = 2384 [6.27.19]
This is the 11th highest rated z420 on Passmark of 1498 tested.
The CPU was $58, GTX 1060 6GB was $114, $104 for memory, and Samsung 860 EVO was a leftover from an HP z620.
Upgrading and seeing improvements is enjoyable- if it can be done within a reasonable cost to benefit ratio. If the system needs strong performance especially for work or gaming, it is best to consider changing a couple of generations forward as the newer parts are not disproportionately more expensive considering the performance. For example, the Xeon X3230 2.66GHz of produces a CPU score of 3408 for $26 ( = 131 points per dollar) but the $58 Xeon E5-1650 v2- which is overclocked (using Intel Extreme Tuning Utility) to 4.3GHz, scores 15293 or 263 points per dollar almost exactly twice the cost/benefit. That is a worthwhile +$32 - not a lot of money. Plus, there is SATA III disk, USB 3, PCIe 3.0, and a 600W PSU, so the z420 can be upgraded for a longer time.
BambiBoomZ
HP z620_2 (2017) (R7) > Xeon E5-1680 v2 (8-core@ 4.3GHz) / z420 Liquid Cooling / 64GB DDR3-1866 ECC Reg / Quadro P2000 5GB _ GTX 1070 Ti 8GB / HP Z Turbo Drive M.2 256GB AHCI + Samsung 970 EVO M.2 NVMe 500GB + HGST 7K6000 4TB / Focusrite Scarlett 2i4 sound interface + 2X Mackie MR824 / 825W PSU /> HP OEM Windows 7 Prof.’l 64-bit > 2X Dell Ultrasharp U2715H (2560 X 1440)
[ Passmark Rating = 6280 / CPU rating = 17178 / 2D = 819 / 3D= 12629 / Mem = 3002 / Disk = 13751 / Single Thread Mark = 2368 [10.23.18]
your goals are not compatible,.... modding a non standard case/motherboard to fit a ATX one is not a low cost item and it will never compete with systems like the z400 or newer as it's simply to old
the xw8400 is well past its prime, i strongly recommend a HP z400 (v2) system in its place as your proposed xw8400 upgrades will cost more than half to two thirds the cost of a used v2 z400 system
The card installed was an UAD 2-QUAD. I also have installed an AMD Radeon 850 in slot 2 and a RME HDSPE-FX.
The message still shows with or without any of these cards. Also, I have tried to swap the Radeon with a NVidia GFX card, but the error persists.
contact HP support your system might be under a extended support warranty.
you appear to have corrupt Intel "AMT" firmware and trying to reflash the firmware might cause the system to become non bootable.
for now, enter the bios and disable the AMT feature which is not needed in a non domain setting
Intel® Active Management Technology (Intel® AMT)
I have disabled AMT in the main BIOS and in the MBE, but error shows in every boot.
As I see, the only way to flash the Intel NIC is to put the AMT jumper in write mode and upload the ROM via DOS, but I can't find any AMT BIOS file in the HP downloads section. Do you know if it is safe to use the Intel's BIOS files for the 210 chipset?
i have server rack mounted HPE ProLiant DL360 Gen10 Intel Xeon-S and rack depth 80 cm , when i install it the space between glass door and server is 2 cm ,Is there a problem with airflow and cooling ?
Hi:
HP split into two companies a few years ago.
HP supports PC's, tablets, calculators and printers.
HP Enterprise (HPE) supports servers, switches, routers and tape drives.
You may also want to post your question on the HPE community support forum -- ProLiant servers section...
https://community.hpe.com/t5/ProLiant-Servers-ML-DL-SL/bd-p/itrc-264#.XizaQEBFzGg
I am from kerala, india
I have a hp proliant dl360 g6 model server
It was working normally till last week but now its not booting into the os
I want to know whether the sas disk are working or not
How can i know about the sas details in bios
HP split into two seperate companies years ago HP inc (this site) does not make/support servers HP ENTERPRISE doe
https://www.hpe.com/us/en/support.html
Product mane: HP Compaq dc7600
SKU number AF844AW#ABV
Intel (R) Pentium 4 CPU 3.00GHZ
Speed 3000/800MHZ
Stepping F65
My Hp Z640 workstion won't turn on when I have attached the Power supply with the motherboard the fan of the PSU is stopped spinning and no power in the board I have changed the motherboard but same problem I can not identify the which one is fault the PSU or the motherboard .Plzzzzz help me
Hi:
What is the processor model that you installed?
Below is the link to the dc7600 quickspecs. You can find the supported processors on page 6.