I did this: open case, pull out riser board, clean RAM memories, swap RAM memories before installing them, reseat riser board. It worked for 15 days until today. Today the Z620 shut down by itself and when booting up it showed the error in first picture. The 2nd boot up it showed this error in the 2nd picture.
Do you think it could be the fact I reinstalled the riser board and not the RAM memories which removed the error? ( I did not remove any CPU or CPU Heatsink) so I exclude the error being from CPUs. Image may be NSFW. Clik here to view.
CONFIG: Z620 - Dual E5-2690 + 32GB EEC 1600 DELL Certified ( 2*8GB on Mainboard + 2*8Gb on Riserboard)
I'm not a BIOS export, from HPDM perspective I think you can add delete tasks after setting BIOS configuration to clean up the temporary files (I tried in my lab and didn't see any abnormal).
Sorry my question is concern with HPDM only, you mean after successfull execution of the task "set_bios_config_win10IoT" then create a task by follwoing command to delete the temp files.
cd c:\TEMP
del BiosConfigUtility64.exe
del set_t620_BiosConfig.txt
Or how did you tried in your lab setup via HPPDM to delete files ?
Last reply worked it means the second template will be deleted the temp files and alreday checked by logging to thin-client console and temp files are deleted.
But the next thing is that if i need to verify that my bios settings are really changed, so i need to apply Get_Bios_Config_win10IoT to see what is the current BIOS settings after applied set template ?
But BIOS settings are didn't effect after applying template "Get_Bios_Settings_Win10Iot" to see the effect on which i got the file and see inside t620_BiosConfig.txt but no thing changed same as before.
First i applied template "Set_Bios_Config_Win10:
Image may be NSFW. Clik here to view.Image may be NSFW. Clik here to view.Image may be NSFW. Clik here to view.
Sussessfull result of the above task:
Image may be NSFW. Clik here to view.
Next template is to delete files from temp folder :
Image may be NSFW. Clik here to view.Image may be NSFW. Clik here to view.
task is executed successfully as follows:
Image may be NSFW. Clik here to view.
Now everytemplates is working and executed but after that if we check the result by applying "Get_Bios_Config_Win10IoT" then got the same result.
only two settings need to be changed in the bios setting:
Integrated Graphics: Force
UMA Frame Buffer Size: 1G
set_t620_BiosConfig.txt
BIOSConfig 1.0
;
; Originally created by BIOS Configuration Utility
; Version: 4.0.24.1
; Date="2018/05/04" Time="13:35:53" UTC="2"
;
; Found 87 settings
;
Language
*English
Francais
Espanol
Deutsch
Italiano
Dansk
Suomi
Nederlands
Norsk
Portugues
Svenska
Japanese
Simplified Chinese
Manufacturer (ReadOnly)
Hewlett-Packard
System Board ID (ReadOnly)
21B4
Product Configuration ID (ReadOnly)
System Board CT Number (ReadOnly)
BIOS Revision (ReadOnly)
L40 v02.14
BIOS Date (ReadOnly)
10/20/2016
Processor Type (ReadOnly)
AMD GX-415GA SOC with Radeon(tm) HD Graphics
Processor Speed (ReadOnly)
1500 MHz
Integrated MAC (ReadOnly)
7CD30A219192
Memory Size (ReadOnly)
4096 MB DDR3 / 1600 MT/s / Single Channel
Set Time (hh:mm)
13:35
Set Day (mm/dd/yyyy)
05/04/2018
Apply Defaults and Exit
*Disable
Enable
Sata Emulation
IDE
*AHCI
USB Storage Boot
*Before SATA
Disable
After SATA
UEFI Boot Sources
Windows Boot Manager
USB Floppy/CD
USB Hard Drive
Legacy Boot Sources
USB Floppy/CD
Hard Drive
Network Controller (Realtek PXE B01 D00)
UEFI:CD/DVD Drive
UEFI:Removable Device
UEFI:Network Device
System Audio
*Device available
Device hidden
Network Controller
*Device available
Device hidden
SATA0
Device hidden
*Device available
SATA1
Device hidden
*Device available
Pcie Device in Mini-PCIE Slot
Disable
*Enable
Front USB Ports
Disable
*Enable
USB Port Configuration
Force 2.0
*Auto
Rear USB Ports
Disable
*Enable
Internal USB Ports
Disable
*Enable
Usb Port 0
Disable
*Enable
Usb Port 1
Disable
*Enable
Usb Port 2
Disable
*Enable
Usb Port 3
Disable
*Enable
Usb Port 4
Disable
*Enable
Usb Port 7
Disable
*Enable
Usb Port 8
Disable
*Enable
Usb Port 9
Disable
*Enable
PCI Express x4 Slot #
Disable
*Enable
Mini Card Slot
Disable
*Enable
Network Boot
*Enable
Disable
Product Name
HP t620 Quad Core TC
Serial Number[Personal Information Removed]
UUID
A844B059-D0F2-13D4-5B5F-36520D834DE6
SKU Number
J9A94EA#ABB
Family Name (ReadOnly)
103C_53302C G=D
Asset Tracking Number[Personal Information Removed]
Feature Byte
476b6y757M7Q7W7Ya6aBacapaqaubAbYdUdqe6em.Td
Build ID
14WWFTBJ601#SABB#DABB
BIOS Update
*Disable
Auto
Force
Data Execution Prevention
Disable
*Enable
BIOS Image File Name
Virtualization Technology
*Disable
Enable
Trusted Computing
Disable
*Enable
Legacy Support
*Enable
Disable
Secure Boot
Enable
*Disable
Clear Secure Boot Keys
*Don't Clear
Clear
Key Ownership
Custom Keys
*HP Keys
Fast Boot
*Enable
Disable
Smart Cover
*Disable
Notify User
SATA Power Management
Disable
*Enable
S5 Maximum Power Savings
*Disable
Enable
S4/S5 Wake on LAN
*Disable
Enable
CPU Fan Check
Disable
*Enable
POST Messages
*Disable
Enable
After Power Loss
*Off
On
Previous State
POST Delay (in seconds)
*None
5
10
15
20
60
Remote Wakeup Boot Source
*Local Hard Drive
Remote Server
Password Prompt On F9&F12
None
*Setup Password
Power on Sunday
*Disable
Enable
Power on Monday
*Disable
Enable
Power on Tuesday
*Disable
Enable
Power on Wednesday
*Disable
Enable
Power on Thursday
*Disable
Enable
Power on Friday
*Disable
Enable
Power on Saturday
*Disable
Enable
Power on Time (hh:mm)
00:00
Serial Port A
*Disable
IO=3F8h; IRQ=4;
IO=3F8h; IRQ=3;
IO=2F8h; IRQ=4;
IO=2F8h; IRQ=3;
IO=3E8h; IRQ=4;
IO=3E8h; IRQ=3;
IO=2E8h; IRQ=4;
IO=2E8h; IRQ=3;
Serial Port B
*Disable
IO=3F8h; IRQ=4;
IO=3F8h; IRQ=3;
IO=2F8h; IRQ=4;
IO=2F8h; IRQ=3;
IO=3E8h; IRQ=4;
IO=3E8h; IRQ=3;
IO=2E8h; IRQ=4;
IO=2E8h; IRQ=3;
Parallel Port
*Disable
IO=378h; IRQ=7; DMA=1;
IO=378h; IRQ=7; DMA=3;
IO=278h; IRQ=7; DMA=1;
IO=278h; IRQ=7; DMA=3;
IO=3BCh; IRQ=7; DMA=1;
IO=3BCh; IRQ=7; DMA=3;
PCI SERR# Generation
Disable
*Enable
PCI VGA Palette Snooping
*Disable
Enable
Printer Mode
Output-Only
Bi-Directional
*ECP and EPP Mode
Num Lock State at Power-On
On
*Off
Integrated Graphics
Auto
*Force
Disable
UMA Frame Buffer Size
32M
64M
128M
256M
512M
*1G
Multi-Processor
Disable
*Enable
Integrated Audio
Disable
*Enable
Internal Speaker
Disable
*Enable
NIC PXE Option ROM Download
*Enable
Disable
after applied above set template then excecuted suceesfuly then again applied to get_template to verify that what did set its really get effected but below is the proof not really :
t620_BiosConfig:
BIOSConfig 1.0
;
; Originally created by BIOS Configuration Utility
; Version: 4.0.24.1
; Date="2018/05/07" Time="09:06:26" UTC="2"
;
; Found 87 settings
;
Language
*English
Francais
Espanol
Deutsch
Italiano
Dansk
Suomi
Nederlands
Norsk
Portugues
Svenska
Japanese
Simplified Chinese
Manufacturer (ReadOnly)
Hewlett-Packard
System Board ID (ReadOnly)
21B4
Product Configuration ID (ReadOnly)
System Board CT Number (ReadOnly)
BIOS Revision (ReadOnly)
L40 v02.14
BIOS Date (ReadOnly)
10/20/2016
Processor Type (ReadOnly)
AMD GX-415GA SOC with Radeon(tm) HD Graphics
Processor Speed (ReadOnly)
1500 MHz
Integrated MAC (ReadOnly)
7CD30A211382
Memory Size (ReadOnly)
4096 MB DDR3 / 1600 MT/s / Single Channel
Set Time (hh:mm)
09:06
Set Day (mm/dd/yyyy)
05/07/2018
Apply Defaults and Exit
*Disable
Enable
Sata Emulation
IDE
*AHCI
USB Storage Boot
*Before SATA
Disable
After SATA
UEFI Boot Sources
Windows Boot Manager
USB Floppy/CD
USB Hard Drive
Legacy Boot Sources
USB Floppy/CD
Hard Drive
Network Controller (Realtek PXE B01 D00)
UEFI:CD/DVD Drive
UEFI:Removable Device
UEFI:Network Device
System Audio
*Device available
Device hidden
Network Controller
*Device available
Device hidden
SATA0
Device hidden
*Device available
SATA1
Device hidden
*Device available
Pcie Device in Mini-PCIE Slot
Disable
*Enable
Front USB Ports
Disable
*Enable
USB Port Configuration
Force 2.0
*Auto
Rear USB Ports
Disable
*Enable
Internal USB Ports
Disable
*Enable
Usb Port 0
Disable
*Enable
Usb Port 1
Disable
*Enable
Usb Port 2
Disable
*Enable
Usb Port 3
Disable
*Enable
Usb Port 4
Disable
*Enable
Usb Port 7
Disable
*Enable
Usb Port 8
Disable
*Enable
Usb Port 9
Disable
*Enable
PCI Express x4 Slot #
Disable
*Enable
Mini Card Slot
Disable
*Enable
Network Boot
*Enable
Disable
Product Name
HP t620 Quad Core TC
Serial Number[Personal Information Removed]
UUID
E6E6243D-307A-9417-8757-23D2EAC6AE52
SKU Number
J9A94EA#ABB
Family Name (ReadOnly)
103C_53302C G=D
Asset Tracking Number[Personal Information Removed]
Feature Byte
476b6y757M7Q7W7Ya6aBacapaqaubAbYdUdqe6em.Td
Build ID
14WWFTBJ601#SABB#DABB
BIOS Update
*Disable
Auto
Force
Data Execution Prevention
Disable
*Enable
BIOS Image File Name
Virtualization Technology
*Disable
Enable
Trusted Computing
Disable
*Enable
Legacy Support
*Enable
Disable
Secure Boot
Enable
*Disable
Clear Secure Boot Keys
*Don't Clear
Clear
Key Ownership
Custom Keys
*HP Keys
Fast Boot
*Enable
Disable
Smart Cover
*Disable
Notify User
SATA Power Management
Disable
*Enable
S5 Maximum Power Savings
*Disable
Enable
S4/S5 Wake on LAN
*Disable
Enable
CPU Fan Check
Disable
*Enable
POST Messages
*Disable
Enable
After Power Loss
*Off
On
Previous State
POST Delay (in seconds)
*None
5
10
15
20
60
Remote Wakeup Boot Source
*Local Hard Drive
Remote Server
Password Prompt On F9&F12
None
*Setup Password
Power on Sunday
*Disable
Enable
Power on Monday
*Disable
Enable
Power on Tuesday
*Disable
Enable
Power on Wednesday
*Disable
Enable
Power on Thursday
*Disable
Enable
Power on Friday
*Disable
Enable
Power on Saturday
*Disable
Enable
Power on Time (hh:mm)
00:00
Serial Port A
*Disable
IO=3F8h; IRQ=4;
IO=3F8h; IRQ=3;
IO=2F8h; IRQ=4;
IO=2F8h; IRQ=3;
IO=3E8h; IRQ=4;
IO=3E8h; IRQ=3;
IO=2E8h; IRQ=4;
IO=2E8h; IRQ=3;
Serial Port B
*Disable
IO=3F8h; IRQ=4;
IO=3F8h; IRQ=3;
IO=2F8h; IRQ=4;
IO=2F8h; IRQ=3;
IO=3E8h; IRQ=4;
IO=3E8h; IRQ=3;
IO=2E8h; IRQ=4;
IO=2E8h; IRQ=3;
Parallel Port
*Disable
IO=378h; IRQ=7; DMA=1;
IO=378h; IRQ=7; DMA=3;
IO=278h; IRQ=7; DMA=1;
IO=278h; IRQ=7; DMA=3;
IO=3BCh; IRQ=7; DMA=1;
IO=3BCh; IRQ=7; DMA=3;
PCI SERR# Generation
Disable
*Enable
PCI VGA Palette Snooping
*Disable
Enable
Printer Mode
Output-Only
Bi-Directional
*ECP and EPP Mode
Num Lock State at Power-On
On
*Off
Integrated Graphics
*Auto
Force
Disable
UMA Frame Buffer Size
32M
64M
128M
256M
*512M
1G
Multi-Processor
Disable
*Enable
Integrated Audio
Disable
*Enable
Internal Speaker
Disable
*Enable
NIC PXE Option ROM Download
*Enable
Disable
I am having a heck of a time getting our HP Think Clients to work with RDS 2016 correctly. Since you can not select connect with smart card and get the Windows login screen like we used to with 2008R2. Clients are having the hardest time because the think client either tells them they failed the login or they need to change a password. There is no direct display of what the client is doing incorrectly. Also if a client needs to change a password that is not working so well either. Does not give them a clear reason why the password did not change. Any help that could be provided would be great.
I would like to confirm the port layout of the newer HP EliteDesk 800 G3's. I have other G2's and G3's from past orders but the configuration for the latest quote I received (Product # 1FZ08UT#ABA) shows 2 low profile pcie slots, 2 full height pcie slots, and no Displayport or VGA ports. Also, there is no rear picture of the 1FZ08UT#ABA, so I can't tell from that info either. My earlier G3's (p n 1FZ05UT#ABA) have 4 low profile PCIE slots, 2 displayports and 1 vga. Are the current G3's that different?
Oh... Uh, yeah.. Maks sense.. As I see it, the power supply would be approximately 3.4" X 2.125" X 7.8" (86mm X 54mm X 200mm), which would be pretty much the maximum possible dimensions it could be. I've also attached a photo that I've placed the measured dimensions on, if its of any assist..Image may be NSFW. Clik here to view.
I see several power supplies on Ebay with similare dimensions - to a point - that being the 'width' of 2.125" as most with 'similar' dimension seem to be 2 ½" or so. Anything 'wider' than 2.125" WILL impinge into (and obstruct) the first expansion slot rear cover - which is no big deal to me as there's 3 or more inches between the ITX motherboard that's installed and the power supply 'bay'. If the only ting I can find is 2.5" 'wide' it can obstruct this expansion slot area...
We recently bought 10+ new Z4 G4 into our corporation. First we recevied one that did not show any bios, post or video output. But the computer itself did start with fans spinning. We tried removing memory sticks, changing to a different graphics card and tried reseating every connector on the motherboard. Still no signs of booting.
The other ones were working fine until today, when 1 of them just decided to do the same thing. It was up and running for 3 days, but now has decided to not cooperate with us anymore.. tried the same procedure as above.
What could be the issue? Is there any ways that i haven't tried that could solve my issue?
I'm considering buying a new NVIDIA TITAN V GPU for my Z440 but I couldn't find ant approval that the GPU is actually supported by Z440 . In case it's not I'll be happy to know which machine will work with it with no issues .
Our Server is down from yesterday, still waiting for the resolution from HP. Hoping for the quick response as they always do but no one gets connected to us till now.
I have the Titan X (Pascal) installed in my Z440 and it works as a charm and i cannot see any problem using a Titan V in the Z440. The Titan V has no special power connectors or special power requirements that the Z440 cannot handle. Image may be NSFW. Clik here to view.
