Re: HP Z620 > 2 questions regarding 6pin >8pin
ok, thanks so far, means i could use these cheap standard adapters?http://www.ebay.de/itm/6pin-to-8pin-PCI-Express-Power-Adapter-Cable-13cm-/201106645003?hash=item2ed2e3e00b:g:JaIAAMXQleBTmJge
View ArticleRe: HP T510 Citrix session disconnect problem
I migrated to inotes 9 (web) and no disconnection presently. Lotus Notes 6.5 cause disconnection with citrix session on T510....
View ArticleClik here to view.
Re: HP Z620 > 2 questions regarding 6pin >8pin
Please make sure the cable has the link wires as shown in the images below; Unfortunately the image on the listing isn't very clear regarding the link wires.
View ArticleRe: HP Z620 > 2 questions regarding 6pin >8pin
StarTech has been a reliable company for me on these types of things. To go "cheap" on such an adapter is not a wise thing to do, and the best ones are not expensive. I have not been able to see the...
View ArticleRe: HP RGS Activation Failed
For a time the activation server was moved. I would install the latest version of HP RGS (which has the updated IP Address) and try again (RGS 7.2.3). And if you use a proxy be sure you set that up...
View ArticleRe: HP RGS connect timeout after authorization
This post is now old, but I hope you were able to open a support case with HP Workstations to trouble shoot. With the information provided I would recomend getting a more complete run down than the...
View ArticleRe: Devicemanager 4.7 SP3 and SP4 break thinclient HPDM agents
On the failed unit, can you please try SC command to recreate the service. If you see any DLL error from library like libeay32.dll. Please post the error message here.
View ArticleRe: HPDM 4.7 SP4 - Thin Clients WES7E not recognized after HPDM Update
On the failed unit, can you please try SC command to recreate the service. If you see any DLL error from library like libeay32.dll. Please post the error message here.
View ArticleRe: Devicemanager 4.7 SP3 and SP4 break thinclient HPDM agents
Whats's the exact commandline for the SC command? it does need parameters.
View ArticleRe: Devicemanager 4.7 SP3 and SP4 break thinclient HPDM agents
Or you can simply go to the Agent folder c:\windows\xpeagent 1. hpdmagent.exe -v to check the version and capture the error message if there is any. If there is no error from above step,...
View ArticleIDE error
i have a hp 800 g1 machine.it goes off giving an IDE ERROR despite changing the system board and hdd.What could be the issue?
View Articleunknown USB Port
Hi,I have a offline-PC and can not find the right driverit's the "USB (Universal Serial-Bus)-Controller" [ven_8086&dev_a12F ]I also searched at intel, but this device could not be foundKind...
View Articlecant recieve image from server due to driver issues
I am trying to start a ghost cast session to image these mp9 g2 units yet seems to not being able to connect i beleive it an issue with nic driver i have install driver pask to pe with no luck. i do an...
View ArticleRe: unknown USB Port
Try installing this. http://h20564.www2.hp.com/hpsc/swd/public/detail?sp4ts.oid=7633279&swItemId=vc_153724_1&swEnvOid=4059 REO
View ArticleUSB not working when booting from WDS boot image HP SFF ProDesk 600G2
Hello,I am having an issue where I have injected the USB drivers into the Boot image on WDS and it is not working when I try to boot HP ProDesk 600G2's. I know that PS/2 keyboards work, and I used one...
View ArticleRe: USB not working when booting from WDS boot image HP SFF ProDesk 600G2
Hi: Did you try this tool? This normally takes care of the issue...puts the USB3 drivers into your W7 installation flash drive. There is a readme file on the page containing the instructions for use....
View ArticleRe: USB not working when booting from WDS boot image HP SFF ProDesk 600G2
I do not have a Win 8.1 or higher machine available to me. So I downloaded this utility and using 7-zip I extracted it, then added the x86 drivers to the pool on the WDS server, and then injected them...
View ArticleRe: USB not working when booting from WDS boot image HP SFF ProDesk 600G2
Sorry that didn't work for you. I have given that tool to many forum members with the Prodesk 600 G2's, Elitedesk 800 G2's, Probook 450 G3's and it worked for them, so unfortunately, I don't have any...
View ArticleClik here to view.
Re: Devicemanager 4.7 SP3 and SP4 break thinclient HPDM agents
After running hpdmagent -v I'm indeed getting a LIBEAY32.dll error: Could not find ordinal 4445 in DLL-file LIBEAY32.dll (translated from Dutch).
View ArticleClik here to view.
Re: Devicemanager 4.7 SP3 and SP4 break thinclient HPDM agents
Libeay32.dll is from 14 january 2013, version 0.9.8.24. Wrong version?
View Article