Re: memory error message 201
According to "HP Compaq 8200 Elite Series QuickSpecs" document (p. 12), the memory DIMMs are populated starting from A(black) socket, then B(black), then A(white) and B(white). Table 8-1 of "8200/6200...
View ArticleClik here to view.
Re: memory error message 201
Hi , The subjected error message leads to RAM failure, Please find below the description on the same. 201-Memory ErrorRAM failure.Ensure memory modules are correctly installed.Verify proper memory...
View ArticleRe: New Nvidia GTX 1080 card on HP ENVY Phoenix 860
nvakleko wrote:FattysGoneWild wrote:Excellent! Thank you for the pic! So, you had to look for different screws to use? You could not use all four of the ones that came with the psu? I do see the 2...
View ArticleClik here to view.
Re: cpu core missing please help
Hi , You may refer to below link to change the CPU Cores. http://smallbusiness.chron.com/set-number-cores-windows-29171.html And as per your unit specification, it has 4 cores/8 threads, as you have...
View ArticleRe: HP Compaq 8200 Elite SFF slow reboot time in legacy Bios Mode with 02.29...
Thanks OlegR, Did you try with the last bios available 02.29 ?
View ArticleRe: HP Compaq 8200 Elite SFF slow reboot time in legacy Bios Mode with 02.29...
No, I did not. I am an old fart, who becomes suspicious when reads "it is just for better security" and "it could not be downgraded then". So, it solves my problem and I am happy.
View ArticleIs it possible to use HPDM to lock down the BIOS on multiple t520 thin clients
Hi, we've recently bought a few hundred t520 thin clients and whilst I have been able to use Device Manager 4.7 to lock most things down and image the clients I now need to lockdown the BIOS. Is this...
View ArticleRe: memory error message 201
Hi,Thank you for the reply.I have this printed information from the manual,I think the order of ram is in reverse to the quoted numbers in figure 8-11 page 180, so that DIMM1 is the most on top when...
View ArticleRe: memory error message 201
Hi,Thank you for your reply to my posting.I have already tried the ram testing and my question was if the ram I tested PC3-12800 4GB has made this error message 201 when placed in DIMM1 socket but does...
View ArticleClik here to view.
Re: memory error message 201
Hi , When you are connecting PC3-12800 4GB RAM alone on the unit, it's giving an error message 201. And when you are connecting the same PC3-12800 4GB RAM with 2 x 2 GB RAM PC3-10600, no error...
View ArticleThinPro5 Update Problem
Hi, we want to update our HP Thin Clients T510 from Thin Pro 3 and 4 to ThinPro 5.2. We are using the HP Device Manager 4.7 SP3. The update works, but after the update the client is not detected...
View ArticleRe: BIOS v3.50 for z420 Workstation
Hi and thanks for the replie's, i have now sorted this problem by fitting a different spares number which had the updated microcode in the boot block.What made this tricky was that another engineer...
View ArticleClik here to view.
Re: New Nvidia GTX 1080 card on HP ENVY Phoenix 860
I don't see how you made a mistake. Its pretty straight forward installing a card and should have booted right up. I don't want to run into this. Puzzled what could have been the problem. My system is...
View ArticleRe: zero client
I strongly suggest the T420 as the T410 is ARM based and has not had updates in years.
View ArticleRe: Fan never runs at high speed
Temperatures look ok so far.Core2Duo CPUs -besides being very energy efficient- have a built-in overheating protection.If they ever reach high core temperatures, the frequency is decreased. If the...
View ArticleCan I create a rule task that won't reboot the thin client if the write...
I'm trying to send a HPDM rule task that will sync the system clock to an NTP server every day at a specific time. With the write filter off it works fine, but with it enabled the system reboots to...
View ArticleRe: BIOS v3.50 for z420 Workstation
1. The microcode does not reside in the boot block. It is a hidden part of BIOS, and you want to load the latest 3.88 BIOS as the only practical way to get the latest microcode. Rarely HP has...
View ArticleRe: cpu core missing please help
The problem was fixed by msconfig and re-toggle advance option on specified number of cpu core drop down menu and restart the machine. Anyway thanks you very much for your support mind.
View Article