Windows 10 1803 killed the video on two Z420's
We have two HP Z420's that we upgraded to Windows 10 1803 earlier. On both computers, after the upgrade, we lost video. We ended up booting to a Windows 10 install USB and rolled back to a previous...
View ArticleRe: BIOS v. 3.92 Disaster = ! and ?
I updated my bios on a Z420 to 3.92 and just got the same problem. The HPFlash program froze and restarted. Got no video output, no power to USB devices. Fans kicked on. Left it there for 60 minutes...
View ArticleRe: T620 thin-client not accepting any remote command via HP Device Manager
I agree with you that task keeps processing till timeout should be caused by the EMPTY current gateway address. Check the discover.log on the Thin Client side to track what DM Agent has been done to...
View ArticleRe: z420 BIOS v.3.91 update failed under Windows 10
Did you ever figure this out? Just had same issue on v3.9.2, can't get it to load the ROM from USB either.
View ArticleClik here to view.
Re: BIOS v. 3.92 Disaster = ! and ?
wrote:MtothaJ, Yes, I had thought that if z620_2 were to be sold, it would include the 64GB registered ECC, but after consideration decided to use it in z420_3. So as to demonstrate the reltivce effect...
View ArticleRe: BIOS v. 3.92 Disaster = ! and ?
Shadow X360, The crisis recovery jumper did work on the first try on the z620 which uses the identical BIOS to the z420, using the sequence as listed in:...
View ArticleRe: BIOS v. 3.92 Disaster = ! and ?
MtothaJ, Thanks for the suggestions and links. I would need to study the way the socket and programmer are used, and those are intriguing possibilities. It seems as though the programmer would be a...
View ArticleRe: T620 thin-client not accepting any remote command via HP Device Manager
Hey Chen, Here is the discovery.log : 2018-05-25 10:38:01 INFO ---------- Locate gateway start ---------- 2018-05-25 10:38:01 INFO ---------- Locate gateway start ---------- 2018-05-25 10:38:01 INFO...
View ArticleClik here to view.
Re: z420 BIOS v.3.91 update failed under Windows 10
jr90, The crisis recovery jumper in the z420 and z620 is located just under the PCI slot on the left side. Here is a copy of the instructions for use of the crisis recovery jumper: In the ZX20...
View ArticleZ440 973 Global Reset: DRAM Corruption Error May Be Observed
I have a Z440 workstation that is producing the 973 Global Reset: DRAM Corruption Error May Be Observed error message on a regular basis. Per the HP KB upgrading the Intel ME to 9.1.37.1002 will...
View ArticleRe: Intel Unite error ID 666666
this software has very specific hardware requirements, and it seems your G3 model does not meet those requirements one such model that did was the HP PC 800 DM G2 code: T4M87UT and here's another...
View ArticleRe: Z440 973 Global Reset: DRAM Corruption Error May Be Observed
have you installed BIOS version 1.65 or later as per the hp advisory? https://support.hp.com/us-en/document/c04926792
View ArticleRe: Z440 973 Global Reset: DRAM Corruption Error May Be Observed
Yes, I am on BIOS 2.41 - 1/25/2018 I also tried re-flashing the Intel ME firmware thinking maybe it didn't 'take' like it should have but the update utility confirmed it was the same version as the...
View ArticleThin Client T530
Hi Every One, Any one know where to find the serial number on T530 Thin device? PPRES1
View ArticleWebCam resolution | specification vs. reality | HP 255 G6
Dear all I recently I bought the notebook HP 255 G6 with the feature number 2RR70EA:http://www8.hp.com/de/de/products/laptops/product-detail.html?oid=18405072#!tab=specs One of the main resons I bought...
View ArticleRe: z420 BIOS v.3.91 update failed under Windows 10
I've been hesitant to experiment with any of our Z420 or Z620 functioning workstations using the methods I posted about earlier (above). I don't want to brick a good workstation by experimenting, but...
View ArticleRe: z420 BIOS v.3.91 update failed under Windows 10
I've been hesitant to experiment with any of our Z420 or Z620 functioning workstations using the methods I posted about earlier (above). I don't want to brick a good workstation by experimenting, but...
View ArticleRe: 2nd CPU riser power input plug melted
Affende, Yes, I was very fond of z620_1 having the two E5-2690's. While it was fantastic for CPU rendering, having 32 Threads at an all-core speed of 3.4GHz, eventually it was z620_1, that taught me...
View ArticleRe: WebCam resolution | specification vs. reality | HP 255 G6
Sorry I can't read information from your link but from Official document http://www8.hp.com/h20195/v2/getpdf.aspx/c05497611.pdf (255 G6 AMD Processor)...
View Article