Re: Z620 Won't POST (4 beeps - Power Supply Failure) With 2nd CPU Riser...
I'm really sad now ... my original Z620, which is a very early block 2, and upgraded to dual E5-2637s ... also just failed. I though pulling the daughterboard might help, and it ran for a few hours...
View ArticleRe: Z400 X5690 W3690 Fastest Processors
SDH, could I also get a copy of your BIOS settings please. My son has Z400 with 6 ram slots and we are going to pick up an x5690 CPU today. I am hoping the upgrade will be smooth but if not having your...
View ArticleRe: z820 sli
the z820 supports SLI and can support up to 3 video cards however HP does not offically support 3 way SLI also the M4000 is not offically supported on the z820, (it's listed as supported on the z840)...
View ArticleRe: Z400 X5690 W3690 Fastest Processors
Happy to help..... you'll need to PM me your email address. Read up on Replicated Setup..... it works very well, and lets you clone my settings but if you save yours first you can always go right back...
View ArticleRe: Can you give me the SMC.BIN in order to reset the unknown bios...
So you say: There is no way to contact HP per forum or email? You have to call per phone? Okay the laptop is working well but i cannot get into Bios. HP isn't willing to help. So better use a company...
View ArticleRe: Power supply fan starts spinning AFTER shutdown
Unfortunately reinstalling Windows doesn't help.I tried both with my standard image and with a bare Windows installer cd. Any other idea to try?
View ArticleRe: Z400 X5690 W3690 Fastest Processors
Well I popped in the X5690 processor and it worked like a charm! Still need to go through the BIOS settings to make sure they are optimal, but I was lucky enough to have it be just plug and play.This...
View ArticleRe: Z620 Won't POST (4 beeps - Power Supply Failure) With 2nd CPU Riser...
I confirmed mine was a dead system board ;( Confirmed with other z620's on site. Im sad as well! It was my first pci 3 bus...first SSD install. RIP! Stevie Hyper HP!
View ArticleRe: Nvidia K80 Accelerator GPU on a HP Z840 Worksation
Thank you, thats a great advise.
View ArticleExpansion PCIe for HP Z840
I currently have 1x Nvidia M6000 24 GB on my HP Z840. I am thinking of utilising 2x TESLA K80 24GB passive GPU's. It has been confirmed that I cannot simply install these accelerator GPU's in the...
View ArticleRe: Can you give me the SMC.BIN in order to reset the unknown bios...
That is correct. You have to call HP technical support. HP is willing to help if you pick up the phone and call them. Next time don't buy a notebook with a locked BIOS, and you wouldn't have the...
View ArticleRe: Power supply fan starts spinning AFTER shutdown
Unfortunately, I do not. The question is...which hardware component has a problem? Is it remotely possible the hard drive itself has a problem? With it disconnected, the PC shuts off without the P/S...
View ArticleRe: thinclient t630 freeze
We start deploying one of them in our environment to replace t620 but the only one t630 we have installed is also experiencing the same behavoir. We had the BIOS version 1.05 then I decided to install...
View ArticleDowngrade T530 License from Win 10IOT to WES7
Hi!One of our customers bought the T530, because of the specific working environment he must use the WES7 right now.Machines that he bought have an W10 IOT can he make a downgrade to WES7?If yes, how...
View ArticleRedirected Printing Taking Too Long Or Failing
Recently we purchased and have begun deploying HP's t420 Thin Clients around our office. Our users RDP to aVM on the local network. Select users have a locally (or direct) attached printer to the t420....
View ArticleRe: z820 928-Fatal PCIe error
Hi! We are experiencing the same problem. The HP-Z820 workstation reboots when the PCIe link goes down. I've tried changing the PCIe link speed in the BIOS to Gen 2 (our PCIe target is Gen 2) but...
View ArticleRe: z820 928-Fatal PCIe error
Stefan, i would have set the BIOS to Automatic for the PCI link speed and then read post #3 here:...
View ArticleRe: Downgrade T530 License from Win 10IOT to WES7
the T530 with WES7 downgrade is a special order at the time of purchase and has a seperate SKU# it can also depend on which licensing level the client has as microsoft has varing levels of this i...
View ArticleRe: Expansion PCIe for HP Z840
trying to use a expansion chassis for the k80 will have the same issue as the z840,..... improper cooling the k80 was designed for servers/systems where the cooling fans are able to blow air directly...
View Article