Re: "Non-system disk or disk error" on T610 and T620 Thin clients
We have the same issue on one floor of our building.Doing a power cycle and/or power drain doesn't always bring them back.We take them to another floor for testing and they work perfectly. Had the same...
View ArticleRe: dives not found, no OS found... System will not boot from original repair...
repteg I'm presuming with a PC this old you're using IDE drives, not SATA drives, right? What you are going to need is a PCI controller card (not PCI-e) that has connectors for IDE drives. It also has...
View ArticleRe: Z420 - Replace Loud PSU Fan ?
Which noctua fan fits on the case. Trying to replace my fans too. Too loud !
View Article392414-001 serial port adapter kit
I bought a HP workstation Z230 two months back. There i used 2 Camera cards in mother board but there is no default RS232 serial port. Now i want to add RS232 port instead of card. I already asked HP...
View ArticleRe: 392414-001 serial port adapter kit
The Z230 SFF workstation has a serial port on the backplane and a special serial port header on the motherboard, but the tower version seems to only have a single special serial port header on the...
View ArticleRe: 0XC0000359 on NVME.SYS
NVMe driver is only requried if you are actually using an NVMe SSD. If you are not using NVMe SSD (HP zTurbo Drive), don't inject this SP. This should work fine! Ref quickspecs: Page 28 onwards if you...
View ArticleRe: Front panel connector pinout
Here is the front panel motherboard pinout. This is a view of the motherboard. Pin 6 is the key, a missing pin, which will help to identify the connector orientation. The Z420, Z620, and Z820 all...
View ArticleHow to change a serial number on Workastation Z840
Hello. i need any help. we have repaired a bios with bios dump of other motherboard. but now is theserialnumber wrong... i need a utility to change a serial number to serial number of the chassis. Thx.
View ArticleRe: Front panel connector pinout
Thanks a lot! This really helps! Been looking over the internet for weeks and no outcome.
View ArticleRe: HP FTP Software Component Browser Download Fails
Hi HH, Can you please try with the 3rd party FTP client (FileZilla for instance) to see if the content is downloadable with same proxy setting? In the meanwhile, please send me the Console log with...
View ArticleRe: Graphics Card upgrade for HP Compaq Elite 8300 SFF PC
Can this video card work in the 8300?ASUS Radeon R7 240 http://www.newegg.com/Product/Product.aspx?Item=N82E16814121799&cm_re=radeon-_-14-121-799-_-Product
View ArticleRe: EliteDesk 800 G1 Mini - Can't boot from M.2 SSD
Dmitry54 was able to get the appropriate M.2 drive that is supported by this system. After figuring things out for myself, I explained it in detail in another thread on this forum. In short, it is...
View ArticleRe: Booting a ProDesk 600 G2 Mini from a M.2 NVMe SSD?
You can use either NVME, what you need to focus on is if the drive's interface matches what your mobo supports. It appears the 600 G2 only supports a PCIe interface on the M.2 port designated for SSD....
View ArticleHP ThinUpdate won't connect
We just receive a new shipment of t520 Thin Clients with Windows 7 Embeded OS. I've gone to HP's Support page and did the auto detect which it finds and identifies the Thin Client. I then download...
View ArticleAP5000 & Windows10
Recently all of our POS machines have started to ask when we would like to schudule an upgrade to windows 10, Is this even supported? if so has anyone successfully upgraded their AP5000 to windows10?...
View ArticleRe: Booting a ProDesk 600 G2 Mini from a M.2 NVMe SSD?
As mentioned in a previous post, the new Intel Skylake generation ProDesk 600 G2 Desktop Mini supports both M.2 SSD technologies with either SATA or NVME interfaces (HP Turbo Drive G1 and G2). There...
View ArticleT520 thin client ans Samsung S4 phone
HiHas anyone ever tried to connect a Samsung Galaxy S4 to a Windows desktop running on a T520 thin client? Or any Thin client? Then I look at USB Manager in the T520 admin settings, the Samsung phone...
View Article