Re: Z640 made great noise with 32GB DDR4 RAM
mixing different memory modules always leads to problems
View ArticleClik here to view.
Re: Z640 made great noise with 32GB DDR4 RAM
Hi @gabornico, If you see the attached picture, you could find the memory modules of Samsung and Micron were not mixed in the mainboard of Z640. The 1st case is 2x Samsung 32GB 4DRx4 PC4-2133P-L Low...
View ArticleRe: Z640 made great noise with 32GB DDR4 RAM
, I have asked that an HP Agent take a look at your problem. Since it is a new computer, it needs to get fixed.
View ArticleProblem to reinstall thin client T620
I try to reinstall WES7P-64 with Thinupdate.But when it boots from the USB media I get this error:Couldn't open WIM file!" R:\xxxxxx I tried several times and write the usb memory again with...
View ArticleClik here to view.
hp xw4600
i update my bios of xw4600 and the bios update succesfully but whne i restart my pc bios can not show and window restart after windows7 logo how to set it problam old bios ver01.11 and i update bios...
View ArticleRe: HP Device Manager problem after upgrade
Hmm, how do I that?I thought it was no support on HPDM..
View ArticleRe: HP Device Manager problem after upgrade
You can open a case via this website: support.hp.com
View ArticleRe: HP Device Manager problem after upgrade
No sorry, cannot.They require service agreement ID or serial number.
View ArticleRe: HPDM 4.6 SP3 to HPDM 4.7 Latest SP
Thanks for the help Chen, I was successful updating the HPDM. I am having issues with the T630 Win10 Thin Clients. I cannot get the Hotkey filter to work, the original Hotkey Filter I use for WES8...
View ArticleRe: Upgrade CPU and MB issue. Fail to Boot
Adding to my prevoious question with the following link that my help someone else upgrading the z800 http://andybrown.me.uk/2014/11/01/z800/
View ArticleRe: Z420 RAM upgrade compatibility and performance concerns
Could it really be so, that this Z420 works on 12800 memory but not with 10600 memory banks? With 10600, screen stays plackm with 12800 it startsup fine. Bios has been cleared.
View ArticlePOS RP7 or RP9 support RAID?
Hi,The reseller locator blows up and data sheet links all fail (404) for RP7 on the HP site. RP9 does not mention RAID. Do the RP7 or RP9 POS systems support RAID 1 (mirroring)? Anyone know an HP POS...
View ArticleZ400 Workstation - Suddenly stopped
Hello, One of our computer suddenly stopped working. Unfortunately, the user did not take notice of the potential LED or Beep error and simply turned off the PC and disconnected the power cable. Upon...
View ArticleBios password
Hi,I need the bios pasword of my photostation to reduce the nois of the fan.Please help me. Thanks
View ArticleClik here to view.
Z600 lowering temps
In a quest to lower temps of Z600's components, I installed Arctic RC heatsinks on the RAM. Despite removing memory fan and it's shroud, I am seeing average of 8 C lower temps on DIMM's and around 4-5...
View ArticleRe: HPDM 4.6 SP3 to HPDM 4.7 Latest SP
Sorry Luke, Hotkey filter is the feature out of my domain. I would suggest you open another case and highlight the issue in the title to draw more attention.
View ArticleRe: Z400 Workstation - Suddenly stopped
Sounds like the system board died.Since you already removed all components, there's no need for further testing.Ebay is a good source for spare parts, just make sure you get the later revision which...
View ArticleRe: hp xw4600
the updated BIOS runs fine, otherwise your machine would not even try to boot into windows.To access BIOS setup, hit the F10 key on your keyboard after pressing the power button.
View ArticleRe: HP z600 Shuts down after 30 seconds from start up
sounds like your power supply is faulty
View ArticleRe: Z600 lowering temps
nice mod. Just don't forget, the Z series are Workstations, not super-silent PCs
View Article