Re: HP Thin Client t510 - error message there is insufficient disk space in...
still does not work. i will get a screen shot of the change to verify
View ArticleRe: Keyboard and mouse not working Z420 OSD Windows 10
Check the Device manager to see if all drivers are installed. Post what you find so we can see which device requires a driver. Both workstations have the Intel c602 chipset, so the deployment image...
View Article8GB Memory Modules for xw8400 / xw8600?
Hello, i own a xw8400 and want to use 4x8GB memory modules. I bought 64GB (8x8GB) DDR2 FB Fully Buffered PC2-5300F 667 Memory and they are accepted by the system. But - after some time the computer...
View ArticleThin clients t510 and t520 RDP Freezing
Hello I have been getting coments from users, and I have seen myself that the RDP session freezes or gets very slow. at times the screen goes black and white. at this point Im not sure if it is an RDP...
View ArticleClik here to view.
Re: HP Thin Client t510 - error message there is insufficient disk space in...
i believe i made the appropriate changes, is there somewhere else?
View ArticleClik here to view.
T520 - empty RDP dialog boxes
HiI've happily configured the XML so my T520 terminals auto log in to a pre defined terminal server but I have a cosmetic question. Does anyone know how to populate the User Name, Password & Domain...
View ArticleClik here to view.
Re: Thin clients t510 and t520 RDP Freezing
I did the package update on of my 510's to the 3.0.0 version.Now Id like to try see if I i do a service pack update on the freerdp. now I see 2 different updates, and I do not know what to choose.
View ArticleRe: Adding SSD to Z1 Workstation
On all the cases where I've gone from a functioning HDD install to an Acronis image capture and then clone build onto a SSD I have not triggered a need to reactivate the W7 install or re-enter software...
View ArticleRe: Adding SSD to Z1 Workstation
Thanks, Scott 8.00 am here, and I am off to catch a plane. Thom
View ArticleRe: 8GB Memory Modules for xw8400 / xw8600?
This might relate. I have not confirmed this but I believe the memory controller on the xw8400 is the same as on the xw6400. I noted for a prior project that HP officially supported specific 8GB...
View ArticleRe: XW6400 with no processor, memory, video card
Ok, I was able to recover the BIOS. I scrounged up an old internal floppy drive to use in the XW6400. I used a USB floppy from a Win7 cmoputer to format a 3.5 diskette.I then copied the DOS flash...
View ArticleRe: 8GB Memory Modules for xw8400 / xw8600?
Thanks for this explanation. It makes sense, allthough i am running the 8 GB modules in the xw8400 for more than 24 hours with memtest and no error, maybe something with the memory controller is...
View ArticleGray Screen
When I turn on my Hp desktop, it boots up fine. Shows the HP screen the goes to a gray screen and stays there. ANyone know what the problem could be?
View ArticleRe: High temp when using Boinc computer sharing software
Thanks for the reply! I went into bios and increased the fan speed a little. I could then run a project 70-90% without going over 87°c I didnt want to run at 100% anyway. Now thats a quick fix...
View ArticleRe: RAID10 - bad block table full
So, I open a support ticket, and without answering it, it was closed. Then I try by phone, reaching a lady in Poland that barely speaks German (I called HP Support Switzerland), let alone understand...
View ArticleRe: RAID10 - bad block table full
I have brought your issue to the attention of an appropriate team within HP. They will likely request information from you in order to look up your case details or product serial number. Please look...
View ArticleRe: Downgrade Prodesk 600 SFF G2 to Windows 7, no mouse and keyboard (usb)
Hello Dr_Ice HP does not support Windows 7 on these products, but a workaround is available. Refer to the following procedure for injecting USB 3.0 drivers into the Windows 7 image: 1.Create an ISO...
View ArticleRe: BIOS
Hello ilijadz I understand that you have some issue with the BIOS Settings on HP unit. Could you please let us know whether its Notebook or Desktop. Please specify the model name of the unit as well....
View ArticleRe: hp prodesk x64 go constant BSOD
Hello wsabee I understand that you get BSOD on ProDesk. Could you please provide the stop code, And also which operating system you are using on this unit. ****Click the Kudos Button on left to say...
View Article