Re: Changing my z600 processor to my z400 processors - CPU upgrade
Hi, The z600 series of workstations support Intel Xeon Processor X5570 QC 2.93 GHz, 95W, 8M cache, 6.40GT/s QPI, DDR3 1333 MHz, HT, TurboIntel Xeon Processor X5560 QC 2.80 GHz, 95W, 8M cache, 6.40GT/s...
View ArticleClik here to view.
Re: HP Z800 PSU (Delta DPS-1050DB A) – Fan headers pinout
Greetings to everyone, who may have been waiting (indefinitely), for the right answer to come around the corner; It was finally confirmed, first - by a skilled repair technician, followed shortly by...
View ArticleClik here to view.
Intel Virtualization Technology (please help)
I get hp xw8600 I have a big error whene i run vmware 12 this error I enable Both (Intel Virtualization Technology & Intel IO Virtualization ) from my bios system& my System...
View ArticleRe: Intel Virtualization Technology (please help)
Your CPU. Intel® Turbo Boost Technology ‡NoIntel® Hyper-Threading Technology ‡NoIntel® Virtualization Technology (VT-x) ‡YesIntel® VT-x with Extended Page Tables (EPT) ‡No...
View ArticleRe: HP z420 motherboard 18 pin layout
As an HP Employee, I cannot recommend using any power supply except the HP supply (I keep repeating this because I have to say it). However, let me give some high-level hints to keep users from...
View ArticleRe: Intel Virtualization Technology (please help)
Realy I didn't know REO, could you tell me wich cpu for my machin supported the EPT?thanks for your help.
View ArticleRe: HP z420 motherboard 18 pin layout
The Z420 power supply is turned on when pin 8 is driven low by the motherboard circuitry. If this does not happen, the power supply will not turn on. P1 pin 17 is an auxiliary +11V rail, meaning...
View ArticleRe: Intel Virtualization Technology (please help)
I have been looking at upgrades but so far none look good. http://www.cpu-upgrade.com/CPUs/Intel/Xeon/X5450.html Sorry, but if I find a good one I will let you know. But it doesn't look good. REO
View Articlepcie detected sometimes
In my z800 I'm trying to add an pcie SATA controler JMicronJMB363 card. It have an eSATA port that I need. Sometimes I this card is detected in the boot and I can use it in my Debian OS.However, most...
View ArticleClik here to view.
Re: pcie detected sometimes
I can't help you directly on that card issue, but related to eSATA..... are you aware that you can set SATA port(s) to eSATA standards in that workstation? You can access that via BIOS. I have found a...
View ArticleLooking for another brand
I am a bit tired of the terrible support HP provides (which is practicaly none). Recently, I just had a simple question about needing to find out what kind of graphics card I should buy and HP wanted...
View ArticleRe: Looking for another brand
This is the next GEN we will be getting. http://www.dell.com/learn/us/en/04/large-business/intel-xeon The older one we have has been up and running for 5 years+ 24-7. Best regards, REO
View ArticleRe: pcie detected sometimes
Thanks a lot for your response, SDH.The problem I have is that I want to use disks more over 2 terabytes, and the disk controller of z800 don't recognize more than 2T of capacity.I had the pcie SATA...
View ArticleClik here to view.
Re: z820 e5-2600 v2 ivy bridge upgrade
Good information ... you may discover an easier way of updating the bootblock Word of caution though. The Failsafe Boot Block code (crisis recovery) is in the boot block range (FF0000 - FFFFF). So a...
View ArticleRe: pcie detected sometimes
Got it.... Another idea would be to put in one of the HP Texas Instruments "2x2" USB3 cards (as I have done in a number of HP workstations including in my Z400 and Z600). You'd want that in one of...
View ArticleRe: HP T420 ThinPro 5.2 Capture Image Problem
Similar solution worked for me in the end ... from memory. Had to work through hours of troubleshooting with HP support who seemed to have no idea. Haven't got much confidence when we start rollout...
View ArticleMaking a custom workstation.
I lives in Dhaka, Bangladesh. I want to make a custome workstation. Is there any chance to get the custome workstation? If possible then how can i get this?
View ArticleRe: Making a custom workstation.
Hi, I believe CTO (Configure To Order) service is only abailable in the US (may be the whole North America). You can ask your friends from the US to order for you and ONLY from available...
View Article