Re: HP Z4 G4 replaced Quadro p4000 with RTX2080
Bolis, Only to eliminate a residual driver conflict as a possibility. It appears that the power supply and connection is proper and If the BIOS is up to date, consider reinstalling the RTX 2080 driver,...
View ArticleRe: HP Z4 G4 replaced Quadro p4000 with RTX2080
earlier HP workstations used a multi rail power supply instead of the more common single rail supply found in consumer systems the main difference is that on a multirail supply it is possible to...
View ArticleRe: Z840 Personal Workstation's top panel removal
Remove the left and right side covers and the front cover first which is held in by 2 small sliver T10 torx screws the black plastic top cover is held in place by hooks that run along the side of both...
View ArticleRe: HP Z4 G4 replaced Quadro p4000 with RTX2080
DGroves, The RTX 2080 is rated at 215W/225W (Founders Edition) and the NVIDIA required minimum power supply is 650W. https://www.nvidia.com/en-us/geforce/graphics-cards/rtx-2080/ As the OP's Z4 G4 has...
View ArticleRe: HP Z4 G4 replaced Quadro p4000 with RTX2080
BambiBoomZ, please reread my comments..... if the Z4 G4 does use a multi rail power supply instead of a single rail supply then overloading the GPU rail is a real possibility as the 1000 watt supply...
View ArticleRe: HP Z4 G4 replaced Quadro p4000 with RTX2080
"1. As to the 928 PCIe Fatal-Error Completion-Timeout, see this post:" I will try to clean the PCIe slot and graphics card and retry different slots again to completely eliminate a PCIe slot problem....
View ArticleRe: HP Z4 G4 replaced Quadro p4000 with RTX2080
Bolis, Before making any further changes, consider starting the system and running HWMonitor or similar on top, monitoring the GPU temperature so as to eliminate the possibility that there is a...
View ArticleRe: Gaming GPU (GTX 1080) on Proliant DL380 GEN9 HP Server
Hi Nikola_tesla,I can only suggest you to check default configurations, suggested by HP - whether or not they have options with like 5 GPUs 250-300W each. If they do have such options, you should be...
View ArticleEliteDesk 800 G1 SFF why BIOS 2.71 in downloads but 2.77 via security bulletin?
Hi I was certain the 800 G1 SFF would get a BIOS update for Microcode Updates for MDS processor bugs yet the officially listed version for this model is a version 2.71 from 2017 whereas if you search...
View ArticleClik here to view.
Re: EliteDesk 800 G1 SFF why BIOS 2.71 in downloads but 2.77 via security...
Your are correct, and HP has not done a great job on this. I think it is just too detailed and numerous to get them all right by the team trying to keep all the drivers straight. I posted here some...
View ArticleRe: EliteDesk 800 G1 SFF why BIOS 2.71 in downloads but 2.77 via security...
> Why did you not click on the link in the advisory you posted?I did and it gets me a update binary. That's not my issue, I've asked if there as a possibly a reason why HP has not put it on the...
View ArticleRe: EliteDesk 800 G1 SFF why BIOS 2.71 in downloads but 2.77 via security...
Agree.... I'd not hesitate to use that latest version 2.77. Hopefully a moderator will read this thread and get the poor guy in charge of keeping things all straight to fix that.
View ArticleRe: HPDM 5.0 configuration center
Please have a look at file hibernate.properties in folder Server\conf. At line #5 for hibernate.connection.url, if you have a hostname, you can try changing it into IP and save. Then try to start the...
View ArticleRe: ME firmware update for DOS and UEFI (SP82530): parameter passing to...
Hello Chris and iMaxx, Do we have a solution to the question that Chris asks? I am trying to update the ME for an Elite 8300 . Thanks!!!
View ArticleRe: ME firmware update for DOS and UEFI (SP82530): parameter passing to...
as i recall, this updater is/can be run from within windows using the "Command Prompt (Admin) dos window before running the updater, make sure the intel "AMT" option is enabled in the Bios and that the...
View ArticleHPDM 5.0 Creating new Template
I have recently upgraded to HPDM 5.0 from 4.7 R12 and I am having issues creating/saving new templates. I am able to modify a template, but I am not able to create a new ones. I am using admin accounts...
View ArticleIs My Prodesk 600 G4 Mini vPro enabled?
I'm trying to find a way to tell if our PC's are vPro enabled or not.... Chuck
View ArticleClik here to view.
Re: Is My Prodesk 600 G4 Mini vPro enabled?
Take a look in the QuickSpecs for that computer: http://www8.hp.com/h20195/V2/GetPDF.aspx/c06043924 Take a look starting at page 11 for your particular box and processor. Use the free CPUz utility to...
View ArticleHP ProDesk 490 G2 - BIOS update failed, not able to recover
Hi Gents, can I please ask for your help in this topic as I drove myself crazy already not being able to find any information from HP's side. The description of the issue: I bought a HP ProDesk 490 G2...
View Article