Re: Hi, I recieved my 1080 gtz graphic card. I think i dont h...
I was still looking for the second 6pin PCIe cable but there is no track (on my HP Z420 workstation there is no fan on the front), so I think I have version 1 of the workstation. I just hope to solve...
View ArticleComputer starts up normally, a few minute later shutdown with no explanation...
My Office computer (Intel Core i5-2400 (3.10 GHz, 6MB cache, 4 cores Ellite 8200 Microtower)of above model of 2013 (purchase) starts up normally , after few minutes (10 - 45 min) computer shutdown...
View ArticleRe: Computer starts up normally, a few minute later shutdown with no...
and what do the windows log files show? i suspect a thermal issue many people do not really know how much thermal compound to apply, or what the proper pressure between the cpu/heatsink should be as...
View ArticleRe: 929-Fatal MCA error. HA error detected CPU 0 DIMM Slot 5 or 6
this is a english based forum, please post only in english your error is most likely a failing memory module in memory slot 5/6 of CPU 0 first try reseating modules also check proper memory config...
View ArticleRe: Hi, I recieved my 1080 gtz graphic card. I think i dont h...
uiblog, It's a mystery. I have a V1 z420 (E5-1620) and that does have two PCIe GPU power connections "G1" and "G2". That V1 z420 does not have the front fan either, both of the V2 z420's do. Those...
View ArticleRe: 929-Fatal MCA error. HA error detected CPU 0 DIMM Slot 5 or 6
Thank you for visiting our English HP Support Forum. We are only able to reply to posts written in English. To ensure a quick response it would be advisable to post your question in English. The...
View ArticleRe: 3rd party liquid cooling/water chill mod in HP z620 workstation
MtothaJ, I tried some ideas for a z620 dual CPU liquid cooling solution and worked out an idea far enough to establish feasibility. In order not to block the back panel peripherals connections, have to...
View ArticleRe: Adapter to mount Retail PSU in Z210 Workstation?
SDH, Well, things are looking up then. I may just order one of those 600W PSUs from ebay. (Can you link me to the one you found for $32.50? I haven't found one that cheap yet) Can either of you...
View ArticleRe: Computer starts up normally, a few minute later shutdown with no...
yes sir all 3 fans(smps, chasis, heatsink) moving, before showning a hardware engineer computer does not starts in one chance, it starts after 2-3 attempts, 1 st attempt start with high speed of 3...
View ArticleRe: Computer starts up normally, a few minute later shutdown with no...
hmmmmm, ....could possibly be a failing power supply, most hp supplies have a self test function check the HP service manual for your model and see if it has the self test check
View ArticleRe: Hi, I recieved my 1080 gtz graphic card. I think i dont h...
I had taken this workstation second hand at the beginning of the year, again on ebay, and on the title of the ad it was written:"HP Z420 Xeon Workstation E5-1650v2, 32GB RAM, 256GB HDD SSD 1TB Quadro...
View ArticleRe: HP Z220 SSF Boot Issue
I have similar symptoms with an HP Z220 too. I also read up extensively on BIOS recovery and it always comes back to using the ER15 BBR jumper, which is non-existant on my motherboard (I also see the...
View ArticleRe: Hi, I recieved my 1080 gtz graphic card. I think i dont h...
uiblog, In the two z420's, one V1 and the other V2, the G2 connection is hard wired to the power supply: At the lower center, there are G1 and G2 connected to the GTX 660 Ti. These wires are...
View ArticleRe: thinclient t630 freeze
Add a daily reboot will help flushing UWF/wrtie manager We have same issue with getting UWF working correctly with AV vendor.
View ArticleRe: Hi, I recieved my 1080 gtz graphic card. I think i dont h...
I agree with Bambi. Uiblog, take a minute and look on ebay for: 1. Z420 power supply 6002. Z420 power supply 400 Look at the exposed "rear" of these two power supplies.... the cheaper looking one is...
View ArticleRe: HP Z220 SSF Boot Issue
the HP manual refer s to it (Jumper #29) because the location does exist acording to your statement there is a world of diffrence between "does not exist" and the location exists but the 2 pin header...
View ArticleRe: Hi, I recieved my 1080 gtz graphic card. I think i dont h...
Hello SDH, I can confirm that I have a 600W as a power supply, I have attached the image of the label.Unfortunately, at the level of PCIe cables there is only the G1.I noticed among other things that...
View ArticleRe: Hi, I recieved my 1080 gtz graphic card. I think i dont h...
uiblog, 1. The photo attached in your previous post lists the power supply having both G1 and G2. 2. Did you make a complete search for the G2 pushed in between, behind, inside, or under something...
View ArticleRe: thinclient t630 freeze
Thanks for the suggestion, nivalcckw. I can confirm we built a rule task that disables the write filter every night to allow the antivirus updates to be written to the drive. We have another rule task...
View Article