Re: Problem booting
Hi, But I think that the problem is that when the machine is off, I don't know why, but it power on by itself... I don't want that the machine could do this, If it is powered off I want it to remain...
View ArticleiLo behind router
I want to use the ProLiant MicroServer 8 as a small home server and was wondering if it is possible to use the iLO behind a router, while running a webserver. Obviously I have just one public IP, so...
View ArticleRe: Problem booting
This problem look similar to another similar issue reported earlier. Try disabling "Wake on LAN" in BIOS to fix it
View ArticleClik here to view.
Re: Problem booting
Yeah, this option was activated on the Bios, so... thanks!!! I hope that this fix the issue
View ArticleRe: Problem booting
Hi I have a laptop with the same problem how do i get enter to the system diagnosis as all the computer is dead apart from F2 F9 and F10?
View ArticleClik here to view.
Re: Problem booting
Hi! Well in my case, the computer just go to the system diagnosis directly. But if you restart it and press F9 or F11 you can enter to the BiOs and from there run the tests. But anyway, in my desktops,...
View ArticleRe: Problem booting
F10 on HP laptops will take you to BIOS setup.For z240 it is under "Advanced" > "built-in device options" > "Wake- On LAN" you can set it to disable. The specific path for your laptop might...
View ArticleRe: Problem booting
Hi vvines, on my test unit (z240 Tower) I didn't notice this issue, I'm wondering why this affects few but not all. Is your BIOS v1.11?
View ArticleRe: z800 ambient temperature measurement
Hi,I have the same problem as you since last week.How did you resolve your problem? ThanksThomas
View ArticleRe: z800 ambient temperature measurement
You may also want to "personal message" the original poster via his forum signup info available via his link. The temp sensor (a thermisitor usually embedded in the I/O cable) is the usual cause for...
View ArticleHP 8200 does not enter MEBx setup after applying configuration through intel...
Hi, I tried to setup AMT on a HP 8200. I was using intel's sdk for AMT and tried to set it up that is used https instead of the standaard http. After making the config changes I was unable to access...
View ArticleHp Proliant dl380 gen9 server
Эта ошибка появляется до загрузки системы. HP dynamic smart array b140i. If errors exit that warrant contacting service we recommend downloading the active health system (AHS) logs before calling...
View ArticleRe: Hp Proliant dl380 gen9 server
Hi: You may also want to post your question on the HP Enterprise Business Community Support Forum -- Proliant Servers section....
View ArticleZ600 X5650 upgrade
So im trying to upgrade to 2 X5650s but it wont boot. I updated the bios to 3.57 and at least the 2 80mm fans dont go crazy but still no boot. The manuals online say its compatible. Thanks for any help...
View ArticleiLo behind router
I want to use the ProLiant MicroServer 8 as a small home server and was wondering if it is possible to use the iLO behind a router, while running a webserver. Obviously I have just one public IP, so...
View Articlez240 boot issue with dual monitor setup
Issue: Whever the system is booted/rebooted after POST, while transfering control to OS, the system goes into a pause/halt (keyboard and mouse doesn't responds)Workaround: As soon as one of the...
View ArticleHP EliteOne 800 G3 Touch, repeated unexpected shutdowns
I bought this all-in-one couple of weeks ago and it has been nothing but trouble. First of it had problems waking up from sleep. Second, while working on the computer, browsing or just typing in WORD,...
View ArticleHow To Upgrade Firmware on HP ProLiant DL360p Gen8
please tell me how to upgrade the firmware on ProLiant DL360p Gen8. I've got a file to this firmware ( cp027725.exe ). Thanks.
View Article