Re: Z820 Make Use of Front Drive Bays
Fortunately the only bit of shaving I did today was to my face. No harm No foul. Of course you are correct I misquoted your earlier response. I'll let you know how things work out once I am done....
View ArticleRe: Z820 Make Use of Front Drive Bays
header #24 is indeed one of the two optional pwm fan headers (the other is #23) and the fan header has a tab protruding upwards that runs across all pins, instead of just 3 as found on most other 4...
View ArticleClik here to view.
Adaptec 71605 HBA Controller + VMware ESXi 6.5.0
It is Sunday and I have spent the better part of the weekend attempting to finalize my Adaptec ASR-71605 RAID Controller install. So, here is where I find myself stumped for lack of a better word.I set...
View ArticleClik here to view.
Successfully Installed NVIDIA RTX 4090 FE in HP Z8 G4 Workstation - Here's How!
Hello fellow HP enthusiasts,I wanted to share my recent experience upgrading my HP Z8 G4 workstation with an NVIDIA RTX 4090 Founder's Edition (FE) graphics card. After spending months searching for a...
View ArticleDevice doesn't display
I turn on device and have it connected with a display port. The power button is blue and it does 1 beep. I had to replace cmos battery
View ArticleRe: Device doesn't display
Unplug computer and press the power button 2-3 times to discharge residual electricity then plug back in. Turn on\ the computer by holding the power button down for 20 full seconds then release. Press...
View ArticleRe: Device doesn't display
I've tried this and unfortunately still doesn't display I also learned that the storage was replaced with a new ssd. It still does the long beep.
View ArticleRe: Device doesn't display
Take all the memory out and put it back in one stick at a time. Make sure not plugged in when changing out memory Sorry
View ArticleCase Id closed - 5121574230 , 5121573918 & 5121574859
5121574230 , 5121573918 & 5121574859 Why these 3 cases close without part replacement?
View ArticleZ620 Bios update for better support of RX 570 8GB
Hello there. I recently bought a Z620 with Xeon E5 2687 W V2 32 GB of RAM, and RX 570 8 GB GPU.The Bios version release date was 2012, and the GPU doesn't perform well as expect as I was using GTX 970....
View ArticleClik here to view.
HP Z6 G4 Workstation, Second CPU Temperature high
Hi, I got HP Z6 G4 Workstation With CPU riser board for second CPU and it has the standard config with 2 x Xeon Silver 4112 CPUs. I did upgrade both CPU to Xeon Gold 6152. This CPU has TDP...
View ArticleClik here to view.
Z420 / 256G RAM running on 1600MHz instead of 1866MHz
Hi, I did upgrade CPU and RAM on my HP Z420 Workstation. I have the second version so can use both V1 and V2 Xeon processors. I have the latest bios version J61v03.96. CPU is now Xeon E5-2697 v2 with...
View ArticleHow do I cancel My HP Smartfriend Subsccription online?
I'm trying to cancel my hp smart friend subscription online and can't seem to find an active link to do so. Any help would be appreciated.
View ArticleRe: Z420 / 256G RAM running on 1600MHz instead of 1866MHz
If your memory sticks all have the same bus speed, you can go to the memory page in your Bios to change the selected speed to the higher one. If all are not having the same bus speed, then you will...
View ArticleRe: Z420 / 256G RAM running on 1600MHz instead of 1866MHz
Hi, thank you for reply. Z420 bios has not much options. And there is no section for RAM settings. If you know where to find it or it is not so clear from parameter name, that its connected with RAM...
View ArticleRe: HP Z6 G4 Workstation, Second CPU Temperature high
Check the thermal paste for the second CPU it would cause such an issue.
View ArticleRe: Z420 / 256G RAM running on 1600MHz instead of 1866MHz
I'm using Z620. Once I'm back home will check it for you, and capture some photos.
View ArticleRe: HP Z6 G4 Workstation, Second CPU Temperature high
Hi, thank you for reaction. I did use Thermal Grizzly thermal paste. When i did the stress test i remove the heatsink and the paste was nicely placed on whole surface of the CPU. I repeat it and...
View ArticleRe: HP Z6 G4 Workstation, Second CPU Temperature high
Check the fan itself, and make sure that the air flow has no clog, and make sure that the second CPU tray is properly installed. And do you use a GPU card?
View ArticleClik here to view.
Re: HP Z6 G4 Workstation, Second CPU Temperature high
Check the fan itself - this is not easy task as everythink is boxed in plastic. What i see the intake fan is after the hard drives cages - but i didnt instal any 3,5 HDDs yet, so its as open as HP...
View Article