Re: Tesla M2090 / Quadro K2200 in z620
Forgot to mention, the spare 4-pin molex connector (5V, 12V & GND) on my Z620 is located on the DVD drive SATA power cable. The power cable for the DVD drive in my HP Z620 has 2x SATA drive power...
View ArticleRe: HP z800 PSU: 1100W vs 850W
The listing for the workstation states that the CPUs are Xeon 5670. Hopefully I should be clear with the 850W PSU, then. What is the easiest way to verify the model number of the CPU?
View ArticleRe: HP z800 PSU: 1100W vs 850W
CPUz from CPUID.com, free. Or, Windows 7, computer, properties.
View ArticleZ800 - Booting from M.2 (SM951) Drive
I was currently handed a 128GB SM951 (AHCI version and not the NVME version) M.2 SSD drive from a friend who is upgrading and i want to try install it on my Z800 and use as a boot drive. I have bought...
View ArticleRe: HP z420 motherboard 18 pin layout
An additional benefit of using the original HP power supply is that - if you got the plastic air duct cover fitted over the right side RAM banks - it will help suck the hot air from the RAM, through...
View ArticleRe: Z800 - Booting from M.2 (SM951) Drive
I don't know to what extent this will be useful in your particular case, but for the Z420 a Samsung 950 Pro NVMe drive works fine as a boot / windows drive with a m.2 to PCIe adapter card.Going for a...
View ArticleGPU Power take-offs / z620:
Brian1965, I'd seen that M2090 power configuration list and still find it a bit mystifying. It seems casual engineering that the M2090 has a 6-pin and 8-pin connector but that it will run on a single...
View ArticleUnable to use AMT Serial-on-LAN
Hello, I'm facing a problem with a All-in-One desktop machine (HP EliteOne 800 G2) with no serial port available.I need to debug some at kernel/driver level, so I need something as simple as a serial...
View ArticleXHCI Debug Capability
As explain in a previous post [1] I need a way to debug at kernel/driver level.So one of the option is to use XHCI DbC Capability on target and A-to-A cable to the host. I found the soon-to-be-released...
View Articleevent "Kernel General 1" System times changes every time
Hi there, one of my customers have 6 workstations 400 G1 i3. Problem exists on all of the pc's. The system time changes every time. CMOS battery allready renewed. BIOS update 2.48 installed. The pc's...
View ArticleRe: event "Kernel General 1" System times changes every time
The step by step solution is as follows:1 Boot windows2 click start>>run and type regedit.click OK.3 The windows registry editor should pop up.Navigate with in the explorer...
View ArticleClik here to view.
Re: HP z420 motherboard 18 pin layout
Dan_WGBU wrote:The Z420 power supply is turned on when pin 8 is driven low by the motherboard circuitry. If this does not happen, the power supply will not turn on. P1 pin 17 is an auxiliary +11V...
View ArticleUSB Ports Stop working on my xw8600
My xw8600 lost control via USB ports at boot-up. Booting with PS2 keyboard and mouse allows me to sign in.Full shut down and removal from power for two minutes will get the USB ports working again for...
View ArticleFront panel header pinout for DL160 G6
Does anybody know what the pinout for the front panel header is? I can't find it anywhere online, and I need to know for a build I will be doing soon. Any help would be appreciated.
View ArticleFront panel header pinout for DL160 G6
Does anyone know the front panel header pinout? I need to know for a build I will be doing relatively soon. Any help would be appreciated.
View ArticleRe: Front panel header pinout for DL160 G6
Hi: You may also want to post your question on the HPE Community Support Forum -- DL Servers section... https://community.hpe.com/t5/ProLiant-Servers-ML-DL-SL/bd-p/itrc-264#.WDtlMuQzXGg
View ArticleRe: Random shutdowns when i open Adobe premiere pro
Ii am using premiere pro cc 2015.2 . i am only having problems with all the editing softwares. but not with notepad or word etc. Actually my gou is not compatible with Premiere pro so i render files...
View Article[Z800] No display on bootup
Hi! I have a problem with my Z800 system. When starting it, the main indicator LED turns blue and after a few seconds I hear one beep. However, the display tells me that there is no cable connected....
View ArticleRe: [Z800] No display on bootup
HI do a Bios flash it will help http://support.hp.com/us-en/document/c02693833
View ArticleStorage system did not join the management group
Recently we have a power failure and after this we ran into this error: Storage system [STORAGE SYS NAME] ([IP ADDRESS]) did not join the management group [MANAGEMENT GROUP NAME].The required directory...
View Article