Clik here to view.
Re: HP Z840 HDD to SSD
I don´t have the answer, but i have seen to many failures when people are trying to do this. I get that you don´t want to set up the OS again, but that will be the fastest and most fail safe approach.
View Articlewebcam for HP desktop Windows 10 - what should I get?
I need a webcam for my HP Envy - I have a 27in HP Pavillion Monitor...suggestions?
View ArticleClik here to view.
Re: Z400 Aftermarket Upgrades
535586-001 = 463990-001. These are the part numbers for the Z400, Z600 and Z800 "Mainstream" heatsink/fan which are rated for up to and including processors with 95W Max TDP. Here is a picture of the...
View ArticleRe: webcam for HP desktop Windows 10 - what should I get?
Hi, I think you need to buy an external webcam. Well, basically any of them will work, such as: http://www.logitech.com/en-au/video/webcams Regards.
View ArticleZ620 keeps shutting down even before showing HP logo
Hi I've been trying to install two nVidia NVS 310 graphics card on the two PCI-e slots of my z620 running Windows 7. I had managed to get windows recognise the two cards and install the drivers. I was...
View ArticleRe: HP Compaq 8200 Elite SFF slow reboot time in legacy Bios Mode with 02.29...
Made an account just to say thank you this worked flawlessly! I had been fighting with my machine for hours and just saw this. Thank you so much!
View ArticleDrive support for controllers
Im looking for which HP DL servers and/or controllers support the newer 8TB SAS drives like the ST8000NM0075.
View ArticleRe: Drive support for controllers
Hi: You may also want to post your question on the HP EBC SUport Forum -- DL Servers section. https://community.hpe.com/t5/ProLiant-Servers-ML-DL-SL/bd-p/itrc-264#.V87pWORTHGg
View ArticleRe: Drive support for controllers
Thanks, will do that. Kinda new, so don't know my way around the different forums yet.
View ArticleRe: Drive support for controllers
You're very welcome. HP split into two companies recently, so they have the enterprise community for servers, switches, routers, etc., and the consumer support forum for the rest. However they also put...
View ArticleRe: Z420 RAM upgrade compatibility and performance concerns
Hi all, Has anyone had any success using non-ecc ram in these machines? I'm currently in the process of trying to upgrade the ram in my z420 workstation running Windows 10. (xeon e5 1620. HP 1589...
View ArticleHP thin client t5540 and ICA problem
Hello, I have a HP t5540 thin client updated to the latest available firmware . I configured ICA client enabling PNAgent , it works until the next reboot . In fact on reboot I get a warning window : "...
View ArticleSet up alert from RAID
I have HP ProLiant DL360 server with RAID 5 (HP Smart Array E200 Controller).OS - Ubuntu 16.04 LTS.I want to set up alerts from RAID to e-mail. Is it possible to do it using hardware capabilities...
View ArticleRe: Set up alert from RAID
Hi: You may also want to post your question on the HP EBC Support Forum -- DL Servers section. https://community.hpe.com/t5/ProLiant-Servers-ML-DL-SL/bd-p/itrc-264#.V87pWORTHGg
View ArticleRe: Z620 keeps shutting down even before showing HP logo
I should add that I dont hear any beeps or blinking LEDs
View ArticleRe: NVMe PCIe SSD boot support in Z820
Hi dan or other HP technicians! I am a HP Z230 Tower Workstation user from China! First please forgive my poor English. I am meeting the same issue you menthioned above. I have tried a Z turbo drive...
View ArticleHow to make a Nvme Z turbo drive G2 bootable on Z230
Hi HP technicians! I am a HP Z230 Tower Workstation user from China! First please forgive my poor English. I am meeting the same issue you menthioned above. I have tried a Z turbo drive G1(Samsung...
View ArticleRe: z240 boot issue with dual monitor setup
Same here.New Z240 workstation with Xeon E3-1245 v5 and two monitors HP Z24n, both attached on the motherboard's DisplayPorts.OS: Windows 7 Enterprise x64 Sp1 with latest patches and drivers (including...
View ArticleRe: NVMe PCIe SSD boot support in Z820
Hi iedjie, I think the version 3.88 is for Z820 or other Z workstations, the latest bios of Z230 is 1.54 and I have updated it during solving the problem. Regards! Stein
View Article