Short answer: Yes.
Long answer: I have one of those in my paws at this moment......
This is called the HP "tool less" 2.5 to 3.5 adapter, and it is nicely engineered, and truly does not need a tool..... it just needs quite a bit of money.
You may know that HP generally has two part numbers for each part..... one a "Spares" part number and the other an "Assembly" part number. Many do not know that the number in the HP PartSurfer is the Spares P/N. The Assembly P/N (stamped on the metal of this) is 668261-001. A pic and I edited in the two types of part numbers:
One that you can buy from eBay that is functionally equivalent, is also made by Foxconn for HP, and it is my favorite for quality and cost. It is HP Assembly P/N 654540-001. It is identical metal/quality except that it needs a screwdriver to mount the SSD in with 4 short M3 screws. When you buy those off eBay the screws generally come with. Search eBay under that number and you'll find lots of pics to review. I even have bought these in sets of 10 directly from China.... never a problem, but it does take a couple of weeks.
Both of these use the same Foxconn "BlindMate" PCB that properly shifts the SATA data/power ports to the left when viewed from rear so they mesh perfectly with the receiving built-in BlindMate counterparts that the Z820/Z620 drawers slide into with the adapter mounted inside the drawer.
Price differential.... about 1/10th the price to have to use a screwdriver.