Gustavwolf wrote:Hi, thanks for your reply!
I just measured my pc 17,2 cm wide, 41 cm tall and 45 cm long.
I used the hp identifying tool to make sure what type my pc was and it came out HP z200 Workstation.
Model: KK669ET
I hope this is helpful.
You have a standard sized tower case and not the SFF type, so you will have no problem installing a standard sized video card.
The PCIe 2.0 is not a problem also, all 3.0 cards are backaward compatible.
One thing which you may want to check is your power supply - i.e. do you have the 6pin or 8pin PCIe power connector? If you don't, there are of course molex adapters and the liek available, but this brings us to the aspect of PSU power (as far as I recall only in the 300W or so range).
So to avoid any problems, my advice would be to perhaps get a 1050Ti (e.g. the EVGA FTW version) - this is powered only via the PCIe slot, is not very long and would be a nice plug and play fit in the Z200.