Hello,
I moved my z420 workstation mainbaord to a different case (Fractal Design R4) and keep running into the screen that notifies me of different panels not being connected.
So far I was able to solve the issues with: Front Panel Audio, USB2.0 and ieee1394 due to searchin through the HP Forums and figuring out which pins need to be connected to ground in order for the mainboard to pass the test.
One issue I can`t seem to figure out / get to disappear is "939-Front Panel Usb 3.0 not connected".
I have connected the USB3.0 cable from the case and it still displays this issue - reading through the forums I came accross that z420/z620 have a USB3.0 redriver .
Do I need the original panel to make the board believe that usb3.0 is connected? Is there any other way of fooling the mainboard that usb3.0 is connected (similar to the detect pins with audio and usb2.0?)
Since the pc will be running 24/7 as small fileserver, I don`t really need front usb3.0 - I`d rather have it boot normally after a power failure and not needing to be physical present to press f1 for it to boot
Any help on how to solve this is highly appreciated