fourth time,....the LSI 2308 driver is part of the windows included drivers
it is not recomended to install a windows 8 or lower driver for this device under windows 10
while many of the OEM drivers are multi OS releases, many are not
and installing a win 8x or lower driver under win 10 will cause issues
if the documentation specificly mentions win 10 support along with previous os's then it's ok to use
but if it only metions win 7 to win 8, then it should not be installed
Paul,...the yellow mark means just that, windows found a known device (in this case the LSI 2308) but something is preventing a sucessful driver install. Trying to install a previous OS's SCSI/SAS driver is not recomended in this case as it's known to cause issues. the "OP" should try removing the device and letting windows redetect, and if that fails try a full system CMOS reset in order to get to a known good state before proceeding with further troubleshooting
