Thank you Paul,
My Bios version: J63 v03.69
Windows 10 has installed effortlessly.
All drivers were updated , except for SAS Controller, in Other Devices (still has a yellow exclamation mark). When i open properties, it says No Driver was installed for this device.
In Windows10, with File Explorer i can only see one hard drive, out of the three hard storage drives there are in total.
But when I select right-click Properties of the visible hard drive, then click on Hardware, all three storage disks devices appear, as follows:
- ATA ST3000DM001-1CH1 SCSI Disk Device (In Properties: This device is working properly. Driver by Microsoft 10.0.17134.1)
- ATA WDC WD5000AAKX-6 SCSI Disk Device (In Properties: This device is working properly. Driver by Microsoft 10.0.17134.1)
- SEAGATE ST3600057SS SCSI Disk Device (In Properties: This device is working properly. Driver by Microsoft 10.0.17134.1)
Here are their Hardware IDs:
- SCSI\DiskATA____ST3000DM001-1CH1HP34
- SCSI\DiskATA____WDC_WD5000AAKX-61H18
- SCSI\DiskSEAGATE_ST3600057SS____HPS1
In the W10 Device Manager, IDE ATA/ATAPI controllers:
- ATA Channel 0 (Hardware ID Intel-1d3c; Internal_IDE_Channel)
- ATA Channel 1 (Hardware ID Intel-1d3c; Internal_IDE_Channel)
- Standard Dual Channel PCI IDE Controller (Hardware ID PCI\VEN_8086&DEV_1D3C&SUBSYS_158B103C&REV_05)
Screenshots below (apologies for poor quality)