A customer want to use one of our products ( Matrox ORION-HD ) in a Z840 workstation.
But there appears this error message:
___________________________
POST Error
928-Fatal PCIe error
PCEIe error detected
Reset caused by SERR on Slot 2
Gferrsts: 0x1 Rperrsts: 0x5C
Press ENTER to continue.
___________________________
On the HP forum I found a solution for a HP Z440 and a MATROX XENIA:
-------------------
Install a standard Graphic adapter (not the Xenia Pro).
Go into the BIOS
Tab Advanced
Slot Settings
scroll down
modify the line PCI SERR# Generation from "Enable" to "Disable
-------------------
But in the BIOS of the Z840 this PCI SERR# parameter is missing
current BIOS version is: BIOS M60 v02.14 2/18/2016
I didn't found any newer BIOS on the HP website
Please help
Thank you, Martin